863Report of Test Results

This Draft Standard for Trial Use contains the format and establishes the data contents of the Report of Test Results Transaction Set (863) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to transmit the results of tests performed to satisfy a specified product or process requirement. This includes, but is not limited to, test data such as inspection data, certification data, and statistical process control measurements.

  • ST
    Transaction Set Header
    M必须(Mandatory)
    Repeat 1

    To indicate the start of a transaction set and to assign a control number

  • BTR
    Beginning Segment for Test Results
    M必须(Mandatory)
    Repeat 1

    To indicate the beginning of a test results transaction set

  • NTE
    Note/Special Instruction
    O可选(Optional)
    Repeat > 1

    To transmit information in a free-form format, if necessary, for comment or special instruction

  • REF
    Reference Identification
    O可选(Optional)
    Repeat 12

    To specify identifying information

  • DTM
    Date/Time Reference
    O可选(Optional)
    Repeat 10

    To specify pertinent dates and times

  • PID
    Product/Item Description
    O可选(Optional)
    Repeat 200

    To describe a product or process in coded or free-form format

  • PO4
    Item Physical Details
    O可选(Optional)
    Repeat 1

    To specify the physical qualities, packaging, weights, and dimensions relating to the item

  • TMD
    Test Method
    O可选(Optional)
    Repeat 1

    To describe the nature of the test performed

  • MEALoop1Measurements LOOPO可选(Optional)Repeat > 1
    MEALMLoop1
    • MEA
      Measurements
      M必须(Mandatory)
      Repeat 1

      To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001)

    • LMLoop1Code Source Information LOOPO可选(Optional)Repeat > 1
      LMLQ
      • LM
        Code Source Information
        M必须(Mandatory)
        Repeat 1

        To transmit standard code list identification information

      • LQ
        Industry Code
        M必须(Mandatory)
        Repeat > 1

        Code to transmit standard industry codes

  • N1Loop1Name LOOPO可选(Optional)Repeat > 1
    N1N2N3N4REFPERLoop1
    • N1
      Name
      M必须(Mandatory)
      Repeat 1

      To identify a party by type of organization, name, and code

    • N2
      Additional Name Information
      O可选(Optional)
      Repeat 2

      To specify additional names

    • N3
      Address Information
      O可选(Optional)
      Repeat 2

      To specify the location of the named party

    • N4
      Geographic Location
      O可选(Optional)
      Repeat 1

      To specify the geographic place of the named party

    • REF
      Reference Identification
      O可选(Optional)
      Repeat 12

      To specify identifying information

    • PERLoop1Administrative Communications Contact LOOPO可选(Optional)Repeat > 1
      PERREF
      • PER
        Administrative Communications Contact
        M必须(Mandatory)
        Repeat 1

        To identify a person or office to whom administrative communications should be directed

      • REF
        Reference Identification
        O可选(Optional)
        Repeat > 1

        To specify identifying information

  • LINLoop1Item Identification LOOPO可选(Optional)Repeat > 1
    LINPIDPO4TMDPSDSPSQTYDTMREFNTEMEALoop2N1Loop2CIDLoop1
    • LIN
      Item Identification
      M必须(Mandatory)
      Repeat 1

      To specify basic item identification data

    • PID
      Product/Item Description
      O可选(Optional)
      Repeat 1000

      To describe a product or process in coded or free-form format

    • PO4
      Item Physical Details
      O可选(Optional)
      Repeat 1

      To specify the physical qualities, packaging, weights, and dimensions relating to the item

    • TMD
      Test Method
      O可选(Optional)
      Repeat 1

      To describe the nature of the test performed

    • PSD
      Physical Sample Description
      O可选(Optional)
      Repeat > 1

      To define the physical sample parameters associated with a test resulting in discrete measurements

    • SPS
      Sampling Parameters for Summary Statistics
      O可选(Optional)
      Repeat > 1

      To define the sampling parameters associated with summary statistics

    • QTY
      Quantity
      O可选(Optional)
      Repeat 10

      To specify quantity information

    • DTM
      Date/Time Reference
      O可选(Optional)
      Repeat 10

      To specify pertinent dates and times

    • REF
      Reference Identification
      O可选(Optional)
      Repeat 1000

      To specify identifying information

    • NTE
      Note/Special Instruction
      O可选(Optional)
      Repeat > 1

      To transmit information in a free-form format, if necessary, for comment or special instruction

    • MEALoop2Measurements LOOPO可选(Optional)Repeat > 1
      MEALMLoop2
      • MEA
        Measurements
        M必须(Mandatory)
        Repeat 1

        To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001)

      • LMLoop2Code Source Information LOOPO可选(Optional)Repeat > 1
        LMLQ
        • LM
          Code Source Information
          M必须(Mandatory)
          Repeat 1

          To transmit standard code list identification information

        • LQ
          Industry Code
          M必须(Mandatory)
          Repeat > 1

          Code to transmit standard industry codes

    • N1Loop2Name LOOPO可选(Optional)Repeat 10
      N1N2N3N4REFPERQTY
      • N1
        Name
        M必须(Mandatory)
        Repeat 1

        To identify a party by type of organization, name, and code

      • N2
        Additional Name Information
        O可选(Optional)
        Repeat 2

        To specify additional names

      • N3
        Address Information
        O可选(Optional)
        Repeat 2

        To specify the location of the named party

      • N4
        Geographic Location
        O可选(Optional)
        Repeat 1

        To specify the geographic place of the named party

      • REF
        Reference Identification
        O可选(Optional)
        Repeat 10

        To specify identifying information

      • PER
        Administrative Communications Contact
        O可选(Optional)
        Repeat 3

        To identify a person or office to whom administrative communications should be directed

      • QTY
        Quantity
        O可选(Optional)
        Repeat 10

        To specify quantity information

    • CIDLoop1Characteristic/Class ID LOOPO可选(Optional)Repeat > 1
      CIDUITPSDSPSDTMREFNTEMEALoop3STALoop1TMDLoop1TSPLoop1
      • CID
        Characteristic/Class ID
        M必须(Mandatory)
        Repeat 1

        To specify the general class or specific characteristic upon which test results are being reported or are to be taken

      • UIT
        Unit Detail
        O可选(Optional)
        Repeat 1

        To specify item unit data

      • PSD
        Physical Sample Description
        O可选(Optional)
        Repeat > 1

        To define the physical sample parameters associated with a test resulting in discrete measurements

      • SPS
        Sampling Parameters for Summary Statistics
        O可选(Optional)
        Repeat > 1

        To define the sampling parameters associated with summary statistics

      • DTM
        Date/Time Reference
        O可选(Optional)
        Repeat 10

        To specify pertinent dates and times

      • REF
        Reference Identification
        O可选(Optional)
        Repeat 10

        To specify identifying information

      • NTE
        Note/Special Instruction
        O可选(Optional)
        Repeat > 1

        To transmit information in a free-form format, if necessary, for comment or special instruction

      • MEALoop3Measurements LOOPO可选(Optional)Repeat > 1
        MEADTMREFLMLoop3
        • MEA
          Measurements
          M必须(Mandatory)
          Repeat 1

          To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001)

        • DTM
          Date/Time Reference
          O可选(Optional)
          Repeat 10

          To specify pertinent dates and times

        • REF
          Reference Identification
          O可选(Optional)
          Repeat 10

          To specify identifying information

        • LMLoop3Code Source Information LOOPO可选(Optional)Repeat > 1
          LMLQ
          • LM
            Code Source Information
            M必须(Mandatory)
            Repeat 1

            To transmit standard code list identification information

          • LQ
            Industry Code
            M必须(Mandatory)
            Repeat > 1

            Code to transmit standard industry codes

      • STALoop1Statistics LOOPO可选(Optional)Repeat > 1
        STADTMREFLMLoop4
        • STA
          Statistics
          M必须(Mandatory)
          Repeat 1

          To provide summary statistics related to a specific collection of test result values

        • DTM
          Date/Time Reference
          O可选(Optional)
          Repeat 10

          To specify pertinent dates and times

        • REF
          Reference Identification
          O可选(Optional)
          Repeat 10

          To specify identifying information

        • LMLoop4Code Source Information LOOPO可选(Optional)Repeat > 1
          LMLQ
          • LM
            Code Source Information
            M必须(Mandatory)
            Repeat 1

            To transmit standard code list identification information

          • LQ
            Industry Code
            M必须(Mandatory)
            Repeat > 1

            Code to transmit standard industry codes

      • TMDLoop1Test Method LOOPO可选(Optional)Repeat 100
        TMDMEADTMREF
        • TMD
          Test Method
          M必须(Mandatory)
          Repeat 1

          To describe the nature of the test performed

        • MEA
          Measurements
          O可选(Optional)
          Repeat > 1

          To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001)

        • DTM
          Date/Time Reference
          O可选(Optional)
          Repeat 10

          To specify pertinent dates and times

        • REF
          Reference Identification
          O可选(Optional)
          Repeat 10

          To specify identifying information

      • TSPLoop1Test Period or Interval LOOPO可选(Optional)Repeat > 1
        TSPMEADTMREFLMLoop5
        • TSP
          Test Period or Interval
          M必须(Mandatory)
          Repeat 1

          To describe a specific period or interval at which tests are performed

        • MEA
          Measurements
          O可选(Optional)
          Repeat > 1

          To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001)

        • DTM
          Date/Time Reference
          O可选(Optional)
          Repeat 10

          To specify pertinent dates and times

        • REF
          Reference Identification
          O可选(Optional)
          Repeat 10

          To specify identifying information

        • LMLoop5Code Source Information LOOPO可选(Optional)Repeat > 1
          LMLQ
          • LM
            Code Source Information
            M必须(Mandatory)
            Repeat 1

            To transmit standard code list identification information

          • LQ
            Industry Code
            M必须(Mandatory)
            Repeat > 1

            Code to transmit standard industry codes

  • HLLoop1Hierarchical Level LOOPO可选(Optional)Repeat > 1
    HLLINPIDPO4CIDQTYTMDPSDTSPMEASPSSTADTMNTELMLoop6NM1Loop1
    • HL
      Hierarchical Level
      M必须(Mandatory)
      Repeat 1

      To identify dependencies among and the content of hierarchically related groups of data segments

    • LIN
      Item Identification
      O可选(Optional)
      Repeat 1

      To specify basic item identification data

    • PID
      Product/Item Description
      O可选(Optional)
      Repeat > 1

      To describe a product or process in coded or free-form format

    • PO4
      Item Physical Details
      O可选(Optional)
      Repeat 1

      To specify the physical qualities, packaging, weights, and dimensions relating to the item

    • CID
      Characteristic/Class ID
      O可选(Optional)
      Repeat 1

      To specify the general class or specific characteristic upon which test results are being reported or are to be taken

    • QTY
      Quantity
      O可选(Optional)
      Repeat > 1

      To specify quantity information

    • TMD
      Test Method
      O可选(Optional)
      Repeat > 1

      To describe the nature of the test performed

    • PSD
      Physical Sample Description
      O可选(Optional)
      Repeat > 1

      To define the physical sample parameters associated with a test resulting in discrete measurements

    • TSP
      Test Period or Interval
      O可选(Optional)
      Repeat 1

      To describe a specific period or interval at which tests are performed

    • MEA
      Measurements
      O可选(Optional)
      Repeat 1

      To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001)

    • SPS
      Sampling Parameters for Summary Statistics
      O可选(Optional)
      Repeat > 1

      To define the sampling parameters associated with summary statistics

    • STA
      Statistics
      O可选(Optional)
      Repeat > 1

      To provide summary statistics related to a specific collection of test result values

    • DTM
      Date/Time Reference
      O可选(Optional)
      Repeat > 1

      To specify pertinent dates and times

    • NTE
      Note/Special Instruction
      O可选(Optional)
      Repeat > 1

      To transmit information in a free-form format, if necessary, for comment or special instruction

    • LMLoop6Code Source Information LOOPO可选(Optional)Repeat > 1
      LMLQ
      • LM
        Code Source Information
        M必须(Mandatory)
        Repeat 1

        To transmit standard code list identification information

      • LQ
        Industry Code
        M必须(Mandatory)
        Repeat > 1

        Code to transmit standard industry codes

    • NM1Loop1Individual or Organizational Name LOOPO可选(Optional)Repeat > 1
      NM1N2N3N4PERN9UIT
      • NM1
        Individual or Organizational Name
        M必须(Mandatory)
        Repeat 1

        To supply the full name of an individual or organizational entity

      • N2
        Additional Name Information
        O可选(Optional)
        Repeat 2

        To specify additional names

      • N3
        Address Information
        O可选(Optional)
        Repeat 2

        To specify the location of the named party

      • N4
        Geographic Location
        O可选(Optional)
        Repeat 1

        To specify the geographic place of the named party

      • PER
        Administrative Communications Contact
        O可选(Optional)
        Repeat > 1

        To identify a person or office to whom administrative communications should be directed

      • N9
        Reference Identification
        O可选(Optional)
        Repeat > 1

        To transmit identifying information as specified by the Reference Identification Qualifier

      • UIT
        Unit Detail
        O可选(Optional)
        Repeat 1

        To specify item unit data

  • SE
    Transaction Set Trailer
    M必须(Mandatory)
    Repeat 1

    To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)

Segment
X12 EDI Release 00403
To indicate the start of a transaction set and to assign a control number
Elements
  • ST01143Transaction Set Identifier Code
    ID
    M必须(Mandatory)
    Min 3 / Max 3

    Code uniquely identifying a Transaction Set

    Codes (320)
  • ST02329Transaction Set Control Number
    AN
    M必须(Mandatory)
    Min 4 / Max 9

    Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set

  • ST031705Implementation Convention Preference
    AN
    O可选(Optional)
    Min 1 / Max 9

    Reference assigned to identify Implementation Convention