863Report of Test Results

This Draft Standard for Trial Use contains the format and establishes the data contents of the Report of Test Results Transaction Set (863) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to transmit the results of tests performed to satisfy a specified product or process requirement. This includes, but is not limited to, test data such as inspection data, certification data, and statistical process control measurements.

  • ST
    Transaction Set Header
    M必须(Mandatory)
    Repeat 1

    To indicate the start of a transaction set and to assign a control number

  • BTR
    Beginning Segment for Test Results
    M必须(Mandatory)
    Repeat 1

    To indicate the beginning of a test results transaction set.

  • NTE
    Note/Special Instruction
    O可选(Optional)
    Repeat 100

    To transmit information in a free-form format, if necessary, for comment or special instruction

  • REF
    Reference Numbers
    O可选(Optional)
    Repeat 12

    To specify identifying numbers.

  • DTM
    Date/Time Reference
    O可选(Optional)
    Repeat 10

    To specify pertinent dates and times

  • PID
    Product/Item Description
    O可选(Optional)
    Repeat 200

    To describe a product or process in coded or free-form format

  • TMD
    Test Method
    O可选(Optional)
    Repeat 1

    To describe the nature of the test performed.

  • MEA
    Measurements
    O可选(Optional)
    Repeat 20

    To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001.)

  • N1Loop1Name LOOPO可选(Optional)Repeat > 1
    N1N2N3N4REFPERLoop1
    • N1
      Name
      M必须(Mandatory)
      Repeat 1

      To identify a party by type of organization, name and code

    • N2
      Additional Name Information
      O可选(Optional)
      Repeat 2

      To specify additional names or those longer than 35 characters in length

    • N3
      Address Information
      O可选(Optional)
      Repeat 2

      To specify the location of the named party

    • N4
      Geographic Location
      O可选(Optional)
      Repeat 1

      To specify the geographic place of the named party

    • REF
      Reference Numbers
      O可选(Optional)
      Repeat 12

      To specify identifying numbers.

    • PERLoop1Administrative Communications Contact LOOPO可选(Optional)Repeat > 1
      PERREF
      • PER
        Administrative Communications Contact
        M必须(Mandatory)
        Repeat 1

        To identify a person or office to whom administrative communications should be directed

      • REF
        Reference Numbers
        O可选(Optional)
        Repeat > 1

        To specify identifying numbers.

  • LINLoop1Item Identification LOOPO可选(Optional)Repeat > 1
    LINPIDTMDMEAPSDSPSQTYDTMREFN1Loop2CIDLoop1
    • LIN
      Item Identification
      M必须(Mandatory)
      Repeat 1

      To specify basic item identification data.

    • PID
      Product/Item Description
      O可选(Optional)
      Repeat 1000

      To describe a product or process in coded or free-form format

    • TMD
      Test Method
      O可选(Optional)
      Repeat 1

      To describe the nature of the test performed.

    • MEA
      Measurements
      O可选(Optional)
      Repeat 20

      To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001.)

    • PSD
      Physical Sample Description
      O可选(Optional)
      Repeat > 1

      To define the physical sample parameters associated with a test resulting in discrete measurements.

    • SPS
      Sampling Parameters for Summary Statistics
      O可选(Optional)
      Repeat > 1

      To define the sampling parameters associated with summary statistics.

    • QTY
      Quantity
      O可选(Optional)
      Repeat 10

      To specify quantity information.

    • DTM
      Date/Time Reference
      O可选(Optional)
      Repeat 10

      To specify pertinent dates and times

    • REF
      Reference Numbers
      O可选(Optional)
      Repeat 1000

      To specify identifying numbers.

    • N1Loop2Name LOOPO可选(Optional)Repeat 10
      N1N2N3N4REFPERQTY
      • N1
        Name
        M必须(Mandatory)
        Repeat 1

        To identify a party by type of organization, name and code

      • N2
        Additional Name Information
        O可选(Optional)
        Repeat 2

        To specify additional names or those longer than 35 characters in length

      • N3
        Address Information
        O可选(Optional)
        Repeat 2

        To specify the location of the named party

      • N4
        Geographic Location
        O可选(Optional)
        Repeat 1

        To specify the geographic place of the named party

      • REF
        Reference Numbers
        O可选(Optional)
        Repeat 10

        To specify identifying numbers.

      • PER
        Administrative Communications Contact
        O可选(Optional)
        Repeat 3

        To identify a person or office to whom administrative communications should be directed

      • QTY
        Quantity
        O可选(Optional)
        Repeat 10

        To specify quantity information.

    • CIDLoop1Characteristic/Class ID LOOPO可选(Optional)Repeat > 1
      CIDUITPSDSPSDTMREFMEALoop1STALoop1TMDLoop1TSPLoop1
      • CID
        Characteristic/Class ID
        M必须(Mandatory)
        Repeat 1

        To specify the general class or specific characteristic upon which test results are being reported or are to be taken

      • UIT
        Unit Detail
        O可选(Optional)
        Repeat 1

        To specify item unit data

      • PSD
        Physical Sample Description
        O可选(Optional)
        Repeat > 1

        To define the physical sample parameters associated with a test resulting in discrete measurements.

      • SPS
        Sampling Parameters for Summary Statistics
        O可选(Optional)
        Repeat > 1

        To define the sampling parameters associated with summary statistics.

      • DTM
        Date/Time Reference
        O可选(Optional)
        Repeat 10

        To specify pertinent dates and times

      • REF
        Reference Numbers
        O可选(Optional)
        Repeat 10

        To specify identifying numbers.

      • MEALoop1Measurements LOOPO可选(Optional)Repeat > 1
        MEADTMREFLMLoop1
        • MEA
          Measurements
          M必须(Mandatory)
          Repeat 1

          To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001.)

        • DTM
          Date/Time Reference
          O可选(Optional)
          Repeat 10

          To specify pertinent dates and times

        • REF
          Reference Numbers
          O可选(Optional)
          Repeat 10

          To specify identifying numbers.

        • LMLoop1Code Source Information LOOPO可选(Optional)Repeat > 1
          LMLQ
          • LM
            Code Source Information
            M必须(Mandatory)
            Repeat 1

            To transmit standard code list identification information

          • LQ
            Industry Code
            M必须(Mandatory)
            Repeat > 1

            Code to transmit standard industry codes

      • STALoop1Statistics LOOPO可选(Optional)Repeat > 1
        STADTMREFLMLoop2
        • STA
          Statistics
          M必须(Mandatory)
          Repeat 1

          To provide summary statistics related to a specific collection of test result values.

        • DTM
          Date/Time Reference
          O可选(Optional)
          Repeat 10

          To specify pertinent dates and times

        • REF
          Reference Numbers
          O可选(Optional)
          Repeat 10

          To specify identifying numbers.

        • LMLoop2Code Source Information LOOPO可选(Optional)Repeat > 1
          LMLQ
          • LM
            Code Source Information
            M必须(Mandatory)
            Repeat 1

            To transmit standard code list identification information

          • LQ
            Industry Code
            M必须(Mandatory)
            Repeat > 1

            Code to transmit standard industry codes

      • TMDLoop1Test Method LOOPO可选(Optional)Repeat 100
        TMDMEADTMREF
        • TMD
          Test Method
          M必须(Mandatory)
          Repeat 1

          To describe the nature of the test performed.

        • MEA
          Measurements
          O可选(Optional)
          Repeat > 1

          To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001.)

        • DTM
          Date/Time Reference
          O可选(Optional)
          Repeat 10

          To specify pertinent dates and times

        • REF
          Reference Numbers
          O可选(Optional)
          Repeat 10

          To specify identifying numbers.

      • TSPLoop1Test Period or Interval LOOPO可选(Optional)Repeat > 1
        TSPMEADTMREFLMLoop3
        • TSP
          Test Period or Interval
          M必须(Mandatory)
          Repeat 1

          To describe a specific period or interval at which tests are performed

        • MEA
          Measurements
          O可选(Optional)
          Repeat > 1

          To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001.)

        • DTM
          Date/Time Reference
          O可选(Optional)
          Repeat 10

          To specify pertinent dates and times

        • REF
          Reference Numbers
          O可选(Optional)
          Repeat 10

          To specify identifying numbers.

        • LMLoop3Code Source Information LOOPO可选(Optional)Repeat > 1
          LMLQ
          • LM
            Code Source Information
            M必须(Mandatory)
            Repeat 1

            To transmit standard code list identification information

          • LQ
            Industry Code
            M必须(Mandatory)
            Repeat > 1

            Code to transmit standard industry codes

  • CTT
    Transaction Totals
    O可选(Optional)
    Repeat 1

    To transmit a hash total for a specific element in the transaction set

  • SE
    Transaction Set Trailer
    M必须(Mandatory)
    Repeat 1

    To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments).

Segment
X12 EDI Release 00305
To indicate the start of a transaction set and to assign a control number
Elements
  • ST01143Transaction Set Identifier Code
    ID
    M必须(Mandatory)
    Min 3 / Max 3

    Code uniquely identifying a Transaction Set.

    Codes (320)
  • ST02329Transaction Set Control Number
    AN
    M必须(Mandatory)
    Min 4 / Max 9

    Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set

  • ST031705Implementation Convention Preference
    AN
    O可选(Optional)
    Min 1 / Max 9