218Motor Carrier Tariff Information

This Draft Standard for Trial Use contains the format and establishes the data contents of the Motor Carrier Tariff Information Transaction Set (218) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to provide for the interchange of processable data extracted from a motor carrier's tariff or pricing information database. It can be used by any producer of motor carrier tariffs or rates to transmit tariff and rate information to shippers or other interested parties. This transaction set is not intended to transmit a complete, legal tariff; rather, it is intended to provide rate information upon the request of shippers or other interested parties. Users of this data should continue to rely on legally filed tariffs as the basis of the legal agreement between themselves and their carriers.

  • ST
    Transaction Set Header
    M必须(Mandatory)
    Repeat 1

    To indicate the start of a transaction set and to assign a control number

  • TF
    Tariff Information
    M必须(Mandatory)
    Repeat 1

    To identify agency tariff.

  • G62
    Date/Time
    O可选(Optional)
    Repeat 5

    To specify pertinent dates and times

  • N9
    Reference Number
    O可选(Optional)
    Repeat 10

    To transmit identifying numbers and descriptive information as specified by the reference number qualifier

  • N1Loop1Name LOOPO可选(Optional)Repeat 10
    N1N2N3N4G61N9
    • N1
      Name
      M必须(Mandatory)
      Repeat 1

      To identify a party by type of organization, name and code

    • N2
      Additional Name Information
      O可选(Optional)
      Repeat 1

      To specify additional names or those longer than 35 characters in length

    • N3
      Address Information
      O可选(Optional)
      Repeat 2

      To specify the location of the named party

    • N4
      Geographic Location
      O可选(Optional)
      Repeat 1

      To specify the geographic place of the named party

    • G61
      Contact
      O可选(Optional)
      Repeat 5

      To identify a person or office to whom communications should be directed

    • N9
      Reference Number
      O可选(Optional)
      Repeat 10

      To transmit identifying numbers and descriptive information as specified by the reference number qualifier

  • TSLoop1Tariff Section LOOPM必须(Mandatory)Repeat 1
    TSG62CLWGPTFRTFM
    • TS
      Tariff Section
      M必须(Mandatory)
      Repeat 1

      To define beginning of section that contains specific tariff information. It will define tariff information that follows.

    • G62
      Date/Time
      O可选(Optional)
      Repeat 5

      To specify pertinent dates and times

    • CL
      Class
      O可选(Optional)
      Repeat 1

      To identify tariff class.

    • WGP
      Tariff Weight Group
      O可选(Optional)
      Repeat 1

      To identify low value break of the specific weight groups used when applying rates.

    • TFR
      Tariff Restrictions
      O可选(Optional)
      Repeat 10

      To define tariff restrictions values such as charges, mileage and weight.

    • TFM
      Tariff Minimum Rates
      O可选(Optional)
      Repeat 10

      To transmit tariff minimum rate values.

  • LSLoop1Loop Header LOOPO可选(Optional)Repeat 1
    LSSCLLoop1LE
    • LS
      Loop Header
      M必须(Mandatory)
      Repeat 1

      To indicate that the next segment begins a loop

    • SCLLoop1Rate Basis/Scales LOOPO可选(Optional)Repeat 9999
      SCLTFMRTS
      • SCL
        Rate Basis/Scales
        M必须(Mandatory)
        Repeat 1

        To identify a scale or rate basis number associated with a particular geographic location or specific set of rates.

      • TFM
        Tariff Minimum Rates
        O可选(Optional)
        Repeat 10

        To transmit tariff minimum rate values.

      • RTS
        Tariff Rates
        O可选(Optional)
        Repeat 1

        To transmit tariff freight rates.

    • LE
      Loop Trailer
      M必须(Mandatory)
      Repeat 1

      To indicate that the loop immediately preceding this segment is complete

  • LSLoop2Loop Header LOOPO可选(Optional)Repeat 1
    LSSCLLoop2LE
    • LS
      Loop Header
      M必须(Mandatory)
      Repeat 1

      To indicate that the next segment begins a loop

    • SCLLoop2Rate Basis/Scales LOOPO可选(Optional)Repeat 9999
      SCLTFMCLLoop1
      • SCL
        Rate Basis/Scales
        M必须(Mandatory)
        Repeat 1

        To identify a scale or rate basis number associated with a particular geographic location or specific set of rates.

      • TFM
        Tariff Minimum Rates
        O可选(Optional)
        Repeat 10

        To transmit tariff minimum rate values.

      • CLLoop1Class LOOPO可选(Optional)Repeat 25
        CLRTS
        • CL
          Class
          M必须(Mandatory)
          Repeat 1

          To identify tariff class.

        • RTS
          Tariff Rates
          O可选(Optional)
          Repeat 1

          To transmit tariff freight rates.

    • LE
      Loop Trailer
      M必须(Mandatory)
      Repeat 1

      To indicate that the loop immediately preceding this segment is complete

  • LSLoop3Loop Header LOOPO可选(Optional)Repeat 1
    LSLXLoop1LE
    • LS
      Loop Header
      M必须(Mandatory)
      Repeat 1

      To indicate that the next segment begins a loop

    • LXLoop1Assigned Number LOOPO可选(Optional)Repeat 99999
      LXGYLSLoop4
      • LX
        Assigned Number
        M必须(Mandatory)
        Repeat 1

        To reference a line number in a transaction set.

      • GY
        Geography
        O可选(Optional)
        Repeat 99

        To define the geographic region from or to which a rate docket applies.

      • LSLoop4Loop Header LOOPO可选(Optional)Repeat 1
        LSLXLoop2LE
        • LS
          Loop Header
          M必须(Mandatory)
          Repeat 1

          To indicate that the next segment begins a loop

        • LXLoop2Assigned Number LOOPO可选(Optional)Repeat 99999
          LXGYSCLTFRTFMRTSLSLoop5
          • LX
            Assigned Number
            M必须(Mandatory)
            Repeat 1

            To reference a line number in a transaction set.

          • GY
            Geography
            O可选(Optional)
            Repeat 99

            To define the geographic region from or to which a rate docket applies.

          • SCL
            Rate Basis/Scales
            O可选(Optional)
            Repeat 1

            To identify a scale or rate basis number associated with a particular geographic location or specific set of rates.

          • TFR
            Tariff Restrictions
            O可选(Optional)
            Repeat 10

            To define tariff restrictions values such as charges, mileage and weight.

          • TFM
            Tariff Minimum Rates
            O可选(Optional)
            Repeat 10

            To transmit tariff minimum rate values.

          • RTS
            Tariff Rates
            O可选(Optional)
            Repeat 1

            To transmit tariff freight rates.

          • LSLoop5Loop Header LOOPO可选(Optional)Repeat 1
            LSSCLLoop3LE
            • LS
              Loop Header
              M必须(Mandatory)
              Repeat 1

              To indicate that the next segment begins a loop

            • SCLLoop3Rate Basis/Scales LOOPO可选(Optional)Repeat 9999
              SCLRTS
              • SCL
                Rate Basis/Scales
                M必须(Mandatory)
                Repeat 1

                To identify a scale or rate basis number associated with a particular geographic location or specific set of rates.

              • RTS
                Tariff Rates
                O可选(Optional)
                Repeat 1

                To transmit tariff freight rates.

            • LE
              Loop Trailer
              M必须(Mandatory)
              Repeat 1

              To indicate that the loop immediately preceding this segment is complete

        • LE
          Loop Trailer
          M必须(Mandatory)
          Repeat 1

          To indicate that the loop immediately preceding this segment is complete

    • LE
      Loop Trailer
      M必须(Mandatory)
      Repeat 1

      To indicate that the loop immediately preceding this segment is complete

  • LSLoop6Loop Header LOOPO可选(Optional)Repeat 1
    LSLXLoop3LE
    • LS
      Loop Header
      M必须(Mandatory)
      Repeat 1

      To indicate that the next segment begins a loop

    • LXLoop3Assigned Number LOOPO可选(Optional)Repeat 99999
      LXGYLSLoop7
      • LX
        Assigned Number
        M必须(Mandatory)
        Repeat 1

        To reference a line number in a transaction set.

      • GY
        Geography
        O可选(Optional)
        Repeat 99

        To define the geographic region from or to which a rate docket applies.

      • LSLoop7Loop Header LOOPO可选(Optional)Repeat 1
        LSLXLoop4LE
        • LS
          Loop Header
          M必须(Mandatory)
          Repeat 1

          To indicate that the next segment begins a loop

        • LXLoop4Assigned Number LOOPO可选(Optional)Repeat 99999
          LXGYSCLLoop4
          • LX
            Assigned Number
            M必须(Mandatory)
            Repeat 1

            To reference a line number in a transaction set.

          • GY
            Geography
            O可选(Optional)
            Repeat 99

            To define the geographic region from or to which a rate docket applies.

          • SCLLoop4Rate Basis/Scales LOOPO可选(Optional)Repeat 9999
            SCLTFRTFMCLLoop2
            • SCL
              Rate Basis/Scales
              M必须(Mandatory)
              Repeat 1

              To identify a scale or rate basis number associated with a particular geographic location or specific set of rates.

            • TFR
              Tariff Restrictions
              O可选(Optional)
              Repeat 10

              To define tariff restrictions values such as charges, mileage and weight.

            • TFM
              Tariff Minimum Rates
              O可选(Optional)
              Repeat 10

              To transmit tariff minimum rate values.

            • CLLoop2Class LOOPO可选(Optional)Repeat 999
              CLRTS
              • CL
                Class
                M必须(Mandatory)
                Repeat 1

                To identify tariff class.

              • RTS
                Tariff Rates
                O可选(Optional)
                Repeat 1

                To transmit tariff freight rates.

        • LE
          Loop Trailer
          M必须(Mandatory)
          Repeat 1

          To indicate that the loop immediately preceding this segment is complete

    • LE
      Loop Trailer
      M必须(Mandatory)
      Repeat 1

      To indicate that the loop immediately preceding this segment is complete

  • LSLoop8Loop Header LOOPO可选(Optional)Repeat 1
    LSLXLoop5LE
    • LS
      Loop Header
      M必须(Mandatory)
      Repeat 1

      To indicate that the next segment begins a loop

    • LXLoop5Assigned Number LOOPO可选(Optional)Repeat 99999
      LXGYSCL
      • LX
        Assigned Number
        M必须(Mandatory)
        Repeat 1

        To reference a line number in a transaction set.

      • GY
        Geography
        O可选(Optional)
        Repeat 99

        To define the geographic region from or to which a rate docket applies.

      • SCL
        Rate Basis/Scales
        O可选(Optional)
        Repeat 1

        To identify a scale or rate basis number associated with a particular geographic location or specific set of rates.

    • LE
      Loop Trailer
      M必须(Mandatory)
      Repeat 1

      To indicate that the loop immediately preceding this segment is complete

  • LSLoop9Loop Header LOOPO可选(Optional)Repeat 1
    LSLXLoop6LE
    • LS
      Loop Header
      M必须(Mandatory)
      Repeat 1

      To indicate that the next segment begins a loop

    • LXLoop6Assigned Number LOOPO可选(Optional)Repeat 99999
      LXGYLSLoop10
      • LX
        Assigned Number
        M必须(Mandatory)
        Repeat 1

        To reference a line number in a transaction set.

      • GY
        Geography
        O可选(Optional)
        Repeat 99

        To define the geographic region from or to which a rate docket applies.

      • LSLoop10Loop Header LOOPO可选(Optional)Repeat 1
        LSLXLoop7LE
        • LS
          Loop Header
          M必须(Mandatory)
          Repeat 1

          To indicate that the next segment begins a loop

        • LXLoop7Assigned Number LOOPO可选(Optional)Repeat 99999
          LXGYTFATFD
          • LX
            Assigned Number
            M必须(Mandatory)
            Repeat 1

            To reference a line number in a transaction set.

          • GY
            Geography
            O可选(Optional)
            Repeat 99

            To define the geographic region from or to which a rate docket applies.

          • TFA
            Tariff Adjustments
            O可选(Optional)
            Repeat 1

            To transmit tariff adjustment values.

          • TFD
            Tariff Adjustments Minimum Charge
            O可选(Optional)
            Repeat 10

            To transmit tariff adjustment values for previously defined minimums.

        • LE
          Loop Trailer
          M必须(Mandatory)
          Repeat 1

          To indicate that the loop immediately preceding this segment is complete

    • LE
      Loop Trailer
      M必须(Mandatory)
      Repeat 1

      To indicate that the loop immediately preceding this segment is complete

  • LSLoop11Loop Header LOOPO可选(Optional)Repeat 1
    LSSCLLoop5LE
    • LS
      Loop Header
      M必须(Mandatory)
      Repeat 1

      To indicate that the next segment begins a loop

    • SCLLoop5Rate Basis/Scales LOOPO可选(Optional)Repeat 9999
      SCLLSLoop12
      • SCL
        Rate Basis/Scales
        M必须(Mandatory)
        Repeat 1

        To identify a scale or rate basis number associated with a particular geographic location or specific set of rates.

      • LSLoop12Loop Header LOOPO可选(Optional)Repeat 1
        LSCLLoop3LE
        • LS
          Loop Header
          M必须(Mandatory)
          Repeat 1

          To indicate that the next segment begins a loop

        • CLLoop3Class LOOPO可选(Optional)Repeat 9999
          CLTFATFD
          • CL
            Class
            M必须(Mandatory)
            Repeat 1

            To identify tariff class.

          • TFA
            Tariff Adjustments
            O可选(Optional)
            Repeat 1

            To transmit tariff adjustment values.

          • TFD
            Tariff Adjustments Minimum Charge
            O可选(Optional)
            Repeat 10

            To transmit tariff adjustment values for previously defined minimums.

        • LE
          Loop Trailer
          M必须(Mandatory)
          Repeat 1

          To indicate that the loop immediately preceding this segment is complete

    • LE
      Loop Trailer
      M必须(Mandatory)
      Repeat 1

      To indicate that the loop immediately preceding this segment is complete

  • LSLoop13Loop Header LOOPO可选(Optional)Repeat 1
    LSLXLoop8LE
    • LS
      Loop Header
      M必须(Mandatory)
      Repeat 1

      To indicate that the next segment begins a loop

    • LXLoop8Assigned Number LOOPO可选(Optional)Repeat 999
      LXMCTGY
      • LX
        Assigned Number
        M必须(Mandatory)
        Repeat 1

        To reference a line number in a transaction set.

      • MCT
        Tariff Accessorial Charges
        O可选(Optional)
        Repeat 99

        To identify accessorial charges and define the range for which each charge is applicable.

      • GY
        Geography
        O可选(Optional)
        Repeat 99

        To define the geographic region from or to which a rate docket applies.

    • LE
      Loop Trailer
      M必须(Mandatory)
      Repeat 1

      To indicate that the loop immediately preceding this segment is complete

  • SE
    Transaction Set Trailer
    M必须(Mandatory)
    Repeat 1

    To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments).

Segment
X12 EDI Release 00305
To indicate the start of a transaction set and to assign a control number
Elements
  • ST01143Transaction Set Identifier Code
    ID
    M必须(Mandatory)
    Min 3 / Max 3

    Code uniquely identifying a Transaction Set.

    Codes (320)
  • ST02329Transaction Set Control Number
    AN
    M必须(Mandatory)
    Min 4 / Max 9

    Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set

  • ST031705Implementation Convention Preference
    AN
    O可选(Optional)
    Min 1 / Max 9