CONDRADrawing administration

The message will be used for the administration of each exchange of a set of engineering/CAD files. It will give additional information about the files; for example, their nature, a list of their contents and technical information necessary to interpret them.

The whole process of exchanging engineering or CAD (Computer Aided Design) files between different parties within projects will be supported by EDIFACT messages. The message CONDRA is one of these messages.

  • UNH
    M必须(Mandatory)
    Repeat 1

    To head, identify and specify a message.

  • BGM
    BEGINNING OF MESSAGE
    M必须(Mandatory)
    Repeat 1

    To indicate the type and function of a message and to transmit the identifying number.

  • DTM
    DATE/TIME/PERIOD
    M必须(Mandatory)
    Repeat 5

    To specify date, and/or time, or period.

  • AUT
    AUTHENTICATION RESULT
    O可选(Optional)
    Repeat 2

    To specify results of the application of an authentification procedure.

  • AGR
    AGREEMENT IDENTIFICATION
    O可选(Optional)
    Repeat 2

    To specify the agreement details.

  • FTX
    FREE TEXT
    O可选(Optional)
    Repeat 10

    To provide free form or coded text information.

  • QTY
    QUANTITY
    O可选(Optional)
    Repeat 5

    To specify a pertinent quantity.

  • RFFLoop1REFERENCE LOOPM必须(Mandatory)Repeat 10
    RFFDOCDTMFTX
    • RFF
      REFERENCE
      M必须(Mandatory)
      Repeat 1

      To specify a reference.

    • DOC
      DOCUMENT/MESSAGE DETAILS
      O可选(Optional)
      Repeat 1

      To identify documents, either printed, electronically transferred, or referenced as specified in message description, including, where relevant, the identification of the type of transaction that will result from this message.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 1

      To specify date, and/or time, or period.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 5

      To provide free form or coded text information.

  • NADLoop1NAME AND ADDRESS LOOPM必须(Mandatory)Repeat 999
    NADLOCFTXINPRCSRFFLoop2CTALoop1
    • NAD
      NAME AND ADDRESS
      M必须(Mandatory)
      Repeat 1

      To specify the name/address and their related function, either by CO82 only and/or unstructured by CO58 or structured by CO80 thru 3207.

    • LOC
      PLACE/LOCATION IDENTIFICATION
      O可选(Optional)
      Repeat 99

      To identify a country/place/location/related location one/related location two.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 10

      To provide free form or coded text information.

    • INP
      PARTIES TO INSTRUCTION
      O可选(Optional)
      Repeat 10

      To specify parties to an instruction and where relevant, the instruction.

    • RCS
      REQUIREMENTS AND CONDITIONS
      O可选(Optional)
      Repeat 10

      To specify sector/subject requirements and conditions.

    • RFFLoop2REFERENCE LOOPO可选(Optional)Repeat 5
      RFFDTM
      • RFF
        REFERENCE
        M必须(Mandatory)
        Repeat 1

        To specify a reference.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 1

        To specify date, and/or time, or period.

    • CTALoop1CONTACT INFORMATION LOOPO可选(Optional)Repeat 10
      CTACOMLOC
      • CTA
        CONTACT INFORMATION
        M必须(Mandatory)
        Repeat 1

        To identify a person or a department to whom communication should be directed.

      • COM
        COMMUNICATION CONTACT
        O可选(Optional)
        Repeat 5

        To identify a communication number of a department or a person to whom communication should be directed.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 1

        To identify a country/place/location/related location one/related location two.

  • EFILoop1EXTERNAL FILE LINK IDENTIFICATION LOOPO可选(Optional)Repeat 99
    EFICEDRFFDTMQTYBIILoop1
    • EFI
      EXTERNAL FILE LINK IDENTIFICATION
      M必须(Mandatory)
      Repeat 1

      To specify the link of one non-EDIFACT external file to an EDIFACT message.

    • CED
      COMPUTER ENVIRONMENT DETAILS
      M必须(Mandatory)
      Repeat 10

      To give a precise definition of all necessary elements belonging to the configuration of a computer system like hardware, firmware, operating system, communication (VANS, network type, protocol, format) and application software.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 10

      To specify a reference.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 5

      To specify date, and/or time, or period.

    • QTY
      QUANTITY
      O可选(Optional)
      Repeat 5

      To specify a pertinent quantity.

    • BIILoop1STRUCTURE IDENTIFICATION LOOPO可选(Optional)Repeat 100000
      BIIGISDTMIMDQTYCTAAUTAGRINPRCSLOCDIMMEARFFLoop3
      • BII
        STRUCTURE IDENTIFICATION
        M必须(Mandatory)
        Repeat 1

        A segment used to convey an indexing structure mechanism which identifies the positioning of a group or item.

      • GIS
        GENERAL INDICATOR
        O可选(Optional)
        Repeat 5

        To transmit a processing indicator.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 10

        To specify date, and/or time, or period.

      • IMD
        ITEM DESCRIPTION
        O可选(Optional)
        Repeat 1

        To describe an item in either an industry or free format.

      • QTY
        QUANTITY
        O可选(Optional)
        Repeat 10

        To specify a pertinent quantity.

      • CTA
        CONTACT INFORMATION
        O可选(Optional)
        Repeat 1

        To identify a person or a department to whom communication should be directed.

      • AUT
        AUTHENTICATION RESULT
        O可选(Optional)
        Repeat 2

        To specify results of the application of an authentification procedure.

      • AGR
        AGREEMENT IDENTIFICATION
        O可选(Optional)
        Repeat 2

        To specify the agreement details.

      • INP
        PARTIES TO INSTRUCTION
        O可选(Optional)
        Repeat 10

        To specify parties to an instruction and where relevant, the instruction.

      • RCS
        REQUIREMENTS AND CONDITIONS
        O可选(Optional)
        Repeat 10

        To specify sector/subject requirements and conditions.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 5

        To identify a country/place/location/related location one/related location two.

      • DIM
        DIMENSIONS
        O可选(Optional)
        Repeat 5

        To specify dimensions.

      • MEA
        MEASUREMENTS
        O可选(Optional)
        Repeat 1

        To specify physical measurements, including dimension tolerances, weights and counts.

      • RFFLoop3REFERENCE LOOPO可选(Optional)Repeat 99
        RFFDOCLoop1SEQLoop1
        • RFF
          REFERENCE
          M必须(Mandatory)
          Repeat 1

          To specify a reference.

        • DOCLoop1DOCUMENT/MESSAGE DETAILS LOOPO可选(Optional)Repeat 1
          DOCDTM
          • DOC
            DOCUMENT/MESSAGE DETAILS
            M必须(Mandatory)
            Repeat 1

            To identify documents, either printed, electronically transferred, or referenced as specified in message description, including, where relevant, the identification of the type of transaction that will result from this message.

          • DTM
            DATE/TIME/PERIOD
            O可选(Optional)
            Repeat 1

            To specify date, and/or time, or period.

        • SEQLoop1SEQUENCE DETAILS LOOPO可选(Optional)Repeat 999
          SEQBIIRFFGISDTMIMD
          • SEQ
            SEQUENCE DETAILS
            M必须(Mandatory)
            Repeat 1

            To provide specific details related to the delivery sequence.

          • BII
            STRUCTURE IDENTIFICATION
            M必须(Mandatory)
            Repeat 1

            A segment used to convey an indexing structure mechanism which identifies the positioning of a group or item.

          • RFF
            REFERENCE
            O可选(Optional)
            Repeat 1

            To specify a reference.

          • GIS
            GENERAL INDICATOR
            M必须(Mandatory)
            Repeat 5

            To transmit a processing indicator.

          • DTM
            DATE/TIME/PERIOD
            O可选(Optional)
            Repeat 1

            To specify date, and/or time, or period.

          • IMD
            ITEM DESCRIPTION
            O可选(Optional)
            Repeat 1

            To describe an item in either an industry or free format.

  • UNT
    M必须(Mandatory)
    Repeat 1

    To end and check the completeness of a message.

Segment
EDIFACT EDI Release D97A
To head, identify and specify a message.
Elements
  • UNH010062MESSAGE REFERENCE NUMBER
    AN
    M必须(Mandatory)
    Min 0 / Max 14

    Unique message reference assigned by the sender.

  • UNH02S009MESSAGE IDENTIFIERM必须(Mandatory)
    00650052005400510057
    • UNH02010065Message type identifier
      ID
      M必须(Mandatory)
      Min 0 / Max 6

      Code identifying a type of message and assigned by its controlling agency.

      Codes (145)
    • UNH02020052Message type version number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Version number of a message type.

      Codes (7)
    • UNH02030054Message type release number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Release number within the current message type version number (0052).

      Codes (55)
    • UNH02040051Controlling agency
      ID
      M必须(Mandatory)
      Min 0 / Max 2

      Code to identify the agency controlling the specification, maintenance and publication of the message type.

      Codes (20)
    • UNH02050057Association assigned code
      AN
      O可选(Optional)
      Min 0 / Max 6

      A code assigned by the association responsible for the design and maintenance of the message type concerned, which further identifies the message.

  • UNH030068COMMON ACCESS REFERENCE
    AN
    O可选(Optional)
    Min 0 / Max 35

    Reference serving as a key to relate all subsequent transfers of data to the same business case or file.

  • UNH04S010STATUS OF THE TRANSFERO可选(Optional)
    00700073
    • UNH04010070Sequence message transfer number
      N
      M必须(Mandatory)
      Min 0 / Max 2

      Number assigned by the sender indicating the numerical sequence of one or more transfers.

    • UNH04020073First/last sequence message transfer indication
      ID
      O可选(Optional)
      Min 1 / Max 1

      Indication used for the first and last message in a sequence of the same type of message relating to the same topic.

      Codes (2)