CONDRODrawing organisation

The message CONDRO is intended to describe the general (project) organisation and structure, valid for a whole project or environment.

The whole process of exchanging engineering or CAD (Computer Aided Design) files between different parties within one project will be supported by EDIFACT messages. The message CONDRO is one of these messages.

  • UNH
    M必须(Mandatory)
    Repeat 1

    To head, identify and specify a message.

  • BGM
    BEGINNING OF MESSAGE
    M必须(Mandatory)
    Repeat 1

    To indicate the type and function of a message and to transmit the identifying number.

  • DTM
    DATE/TIME/PERIOD
    M必须(Mandatory)
    Repeat 5

    To specify date, and/or time, or period.

  • AUT
    AUTHENTICATION RESULT
    O可选(Optional)
    Repeat 2

    To specify results of the application of an authentication procedure.

  • AGR
    AGREEMENT IDENTIFICATION
    O可选(Optional)
    Repeat 2

    To specify the agreement details.

  • FTX
    FREE TEXT
    O可选(Optional)
    Repeat 10

    To provide free form or coded text information.

  • RFFLoop1REFERENCE LOOPM必须(Mandatory)Repeat 5
    RFFDOCDTMFTX
    • RFF
      REFERENCE
      M必须(Mandatory)
      Repeat 1

      To specify a reference.

    • DOC
      DOCUMENT/MESSAGE DETAILS
      O可选(Optional)
      Repeat 1

      To identify documents and details directly related to it.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 1

      To specify date, and/or time, or period.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 5

      To provide free form or coded text information.

  • NADLoop1NAME AND ADDRESS LOOPM必须(Mandatory)Repeat 999
    NADLOCFTXRFFLoop2CTALoop1
    • NAD
      NAME AND ADDRESS
      M必须(Mandatory)
      Repeat 1

      To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    • LOC
      PLACE/LOCATION IDENTIFICATION
      O可选(Optional)
      Repeat 99

      To identify a place or a location and/or related locations.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 10

      To provide free form or coded text information.

    • RFFLoop2REFERENCE LOOPO可选(Optional)Repeat 10
      RFFCEDDTM
      • RFF
        REFERENCE
        M必须(Mandatory)
        Repeat 1

        To specify a reference.

      • CED
        COMPUTER ENVIRONMENT DETAILS
        O可选(Optional)
        Repeat 10

        To give a precise definition of all necessary elements belonging to the configuration of a computer system like hardware, firmware, operating system, communication (VANS, network type, protocol, format) and application software.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 1

        To specify date, and/or time, or period.

    • CTALoop1CONTACT INFORMATION LOOPO可选(Optional)Repeat 10
      CTACOMLOC
      • CTA
        CONTACT INFORMATION
        M必须(Mandatory)
        Repeat 1

        To identify a person or a department to whom communication should be directed.

      • COM
        COMMUNICATION CONTACT
        O可选(Optional)
        Repeat 5

        To identify a communication number of a department or a person to whom communication should be directed.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 1

        To identify a place or a location and/or related locations.

  • DOCLoop1DOCUMENT/MESSAGE DETAILS LOOPO可选(Optional)Repeat 999
    DOCINPRFFMEAEFILoop1
    • DOC
      DOCUMENT/MESSAGE DETAILS
      M必须(Mandatory)
      Repeat 1

      To identify documents and details directly related to it.

    • INP
      PARTIES AND INSTRUCTION
      O可选(Optional)
      Repeat 99

      To specify parties to an instruction, the instruction, or both.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 1

      To specify a reference.

    • MEA
      MEASUREMENTS
      O可选(Optional)
      Repeat 1

      To specify physical measurements, including dimension tolerances, weights and counts.

    • EFILoop1EXTERNAL FILE LINK IDENTIFICATION LOOPO可选(Optional)Repeat 99
      EFICEDDTM
      • EFI
        EXTERNAL FILE LINK IDENTIFICATION
        M必须(Mandatory)
        Repeat 1

        To specify the link of one non-EDIFACT external file to an EDIFACT message.

      • CED
        COMPUTER ENVIRONMENT DETAILS
        O可选(Optional)
        Repeat 10

        To give a precise definition of all necessary elements belonging to the configuration of a computer system like hardware, firmware, operating system, communication (VANS, network type, protocol, format) and application software.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 5

        To specify date, and/or time, or period.

  • BIILoop1STRUCTURE IDENTIFICATION LOOPO可选(Optional)Repeat 100000
    BIIGEIDTMIMDRFFQTYLOCLoop1
    • BII
      STRUCTURE IDENTIFICATION
      M必须(Mandatory)
      Repeat 1

      A segment used to convey an indexing structure mechanism which identifies the positioning of a group or item.

    • GEI
      PROCESSING INFORMATION
      O可选(Optional)
      Repeat 1

      To identify processing information.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 1

      To specify date, and/or time, or period.

    • IMD
      ITEM DESCRIPTION
      O可选(Optional)
      Repeat 1

      To describe an item in either an industry or free format.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 5

      To specify a reference.

    • QTY
      QUANTITY
      O可选(Optional)
      Repeat 1

      To specify a pertinent quantity.

    • LOCLoop1PLACE/LOCATION IDENTIFICATION LOOPO可选(Optional)Repeat 1
      LOCDIMQTYMEA
      • LOC
        PLACE/LOCATION IDENTIFICATION
        M必须(Mandatory)
        Repeat 1

        To identify a place or a location and/or related locations.

      • DIM
        DIMENSIONS
        O可选(Optional)
        Repeat 5

        To specify dimensions.

      • QTY
        QUANTITY
        O可选(Optional)
        Repeat 5

        To specify a pertinent quantity.

      • MEA
        MEASUREMENTS
        O可选(Optional)
        Repeat 1

        To specify physical measurements, including dimension tolerances, weights and counts.

  • UNT
    M必须(Mandatory)
    Repeat 1

    To end and check the completeness of a message.

Segment
EDIFACT EDI Release D07A
To head, identify and specify a message.
Elements
  • UNH010062MESSAGE REFERENCE NUMBER
    AN
    M必须(Mandatory)
    Min 0 / Max 14

    Unique message reference assigned by the sender.

  • UNH02S009MESSAGE IDENTIFIERM必须(Mandatory)
    0065005200540051005701100113
    • UNH02010065Message type
      ID
      M必须(Mandatory)
      Min 0 / Max 6

      Code identifying a type of message and assigned by its controlling agency.

      Codes (210)
    • UNH02020052Message version number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Version number of a message type.

      Codes (8)
    • UNH02030054Message release number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Release number within the current message version number.

      Codes (55)
    • UNH02040051Controlling agency, coded
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
    • UNH02050057Association assigned code
      AN
      O可选(Optional)
      Min 0 / Max 6

      Code, assigned by the association responsible for the design and maintenance of the message type concerned, which further identifies the message.

    • UNH02060110Code list directory version number
      AN
      O可选(Optional)
      Min 0 / Max 6

      Version number of the code list directory.

    • UNH02070113Message type sub-function identification
      ID
      O可选(Optional)
      Min 0 / Max 6

      Code identifying a sub-function of a message type.

      Codes (21)
  • UNH030068COMMON ACCESS REFERENCE
    AN
    O可选(Optional)
    Min 0 / Max 35

    Reference serving as a key to relate all subsequent transfers of data to the same business case or file.

  • UNH04S010STATUS OF THE TRANSFERO可选(Optional)
    00700073
    • UNH04010070Sequence of transfers
      N
      M必须(Mandatory)
      Min 0 / Max 2

      Number assigned by the sender indicating the transfer sequence of a message related to the same topic. The message could be an addition or a change to an earlier transfer related to the same topic.

    • UNH04020073First and last transfer
      ID
      O可选(Optional)
      Min 1 / Max 1

      Indication used for the first and last message in a sequence of messages related to the same topic.

      Codes (2)
  • UNH05S016MESSAGE SUBSET IDENTIFICATIONO可选(Optional)
    0115011601180051
    • UNH05010115Message subset identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of a message subset, assigned by its controlling agency.

    • UNH05020116Message subset version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message subset.

    • UNH05030118Message subset release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message subset version number.

    • UNH05040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH06S017MESSAGE IMPLEMENTATION GUIDELINE IDENTIFICATIONO可选(Optional)
    0121012201240051
    • UNH06010121Message implementation guideline identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of the message implementation guideline, assigned by its controlling agency.

    • UNH06020122Message implementation guideline version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message implementation guideline.

    • UNH06030124Message implementation guideline release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message implementation guideline version number.

    • UNH06040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH07S018SCENARIO IDENTIFICATIONO可选(Optional)
    0127012801300051
    • UNH07010127Scenario identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Code identifying scenario.

    • UNH07020128Scenario version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of a scenario.

    • UNH07030130Scenario release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the scenario version number.

    • UNH07040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)