IFTMBCBooking confirmation

A message from the party providing forwarding and/or transport services to the party booking those services giving the confirmation information to the booking of the consignment concerned. A confirmation might read that the booking of a consignment is accepted, pending, conditionally accepted or rejected.

The conditions under which requested services take place may be given in this message.

This message can also be used between vessel operators, vessel sharing partners and cargo receiving and handling facilities such as marine terminals, inland receiving depots, rail ramps and truck terminals to confirm cargo particulars and equipment requirements of the transport provider to the service provider responsible for dispatching empty equipment and receiving the cargo.

  • UNH
    M必须(Mandatory)
    Repeat 1

    To head, identify and specify a message.

  • BGM
    BEGINNING OF MESSAGE
    M必须(Mandatory)
    Repeat 1

    To indicate the type and function of a message and to transmit the identifying number.

  • CTA
    CONTACT INFORMATION
    O可选(Optional)
    Repeat 1

    To identify a person or a department to whom communication should be directed.

  • COM
    COMMUNICATION CONTACT
    O可选(Optional)
    Repeat 9

    To identify a communication number of a department or a person to whom communication should be directed.

  • DTM
    DATE/TIME/PERIOD
    O可选(Optional)
    Repeat 9

    To specify date, and/or time, or period.

  • TSR
    TRANSPORT SERVICE REQUIREMENTS
    O可选(Optional)
    Repeat 9

    To specify the contract and carriage conditions and service and priority requirements for the transport.

  • FTX
    FREE TEXT
    O可选(Optional)
    Repeat 99

    To provide free form or coded text information.

  • CNT
    CONTROL TOTAL
    O可选(Optional)
    Repeat 9

    To provide control total.

  • GDS
    NATURE OF CARGO
    O可选(Optional)
    Repeat 9

    To indicate the type of cargo as a general classification.

  • LOCLoop1PLACE/LOCATION IDENTIFICATION LOOPO可选(Optional)Repeat 99
    LOCDTM
    • LOC
      PLACE/LOCATION IDENTIFICATION
      M必须(Mandatory)
      Repeat 1

      To identify a place or a location and/or related locations.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

  • RFFLoop1REFERENCE LOOPO可选(Optional)Repeat 99
    RFFDTM
    • RFF
      REFERENCE
      M必须(Mandatory)
      Repeat 1

      To specify a reference.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

  • TCC
    CHARGE/RATE CALCULATIONS
    O可选(Optional)
    Repeat 9

    To specify charges.

  • TDTLoop1TRANSPORT INFORMATION LOOPO可选(Optional)Repeat 99
    TDTDTMTSRLOCLoop2RFFLoop2
    • TDT
      TRANSPORT INFORMATION
      M必须(Mandatory)
      Repeat 1

      To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

    • TSR
      TRANSPORT SERVICE REQUIREMENTS
      O可选(Optional)
      Repeat 9

      To specify the contract and carriage conditions and service and priority requirements for the transport.

    • LOCLoop2PLACE/LOCATION IDENTIFICATION LOOPO可选(Optional)Repeat 99
      LOCDTM
      • LOC
        PLACE/LOCATION IDENTIFICATION
        M必须(Mandatory)
        Repeat 1

        To identify a place or a location and/or related locations.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

    • RFFLoop2REFERENCE LOOPO可选(Optional)Repeat 9
      RFFDTM
      • RFF
        REFERENCE
        M必须(Mandatory)
        Repeat 1

        To specify a reference.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 1

        To specify date, and/or time, or period.

  • NADLoop1NAME AND ADDRESS LOOPO可选(Optional)Repeat 99
    NADLOCCTALoop1TSRLoop1
    • NAD
      NAME AND ADDRESS
      M必须(Mandatory)
      Repeat 1

      To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    • LOC
      PLACE/LOCATION IDENTIFICATION
      O可选(Optional)
      Repeat 9

      To identify a place or a location and/or related locations.

    • CTALoop1CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
      CTACOM
      • CTA
        CONTACT INFORMATION
        M必须(Mandatory)
        Repeat 1

        To identify a person or a department to whom communication should be directed.

      • COM
        COMMUNICATION CONTACT
        O可选(Optional)
        Repeat 9

        To identify a communication number of a department or a person to whom communication should be directed.

    • TSRLoop1TRANSPORT SERVICE REQUIREMENTS LOOPO可选(Optional)Repeat 99
      TSRRFFLOCTPLFTX
      • TSR
        TRANSPORT SERVICE REQUIREMENTS
        M必须(Mandatory)
        Repeat 1

        To specify the contract and carriage conditions and service and priority requirements for the transport.

      • RFF
        REFERENCE
        O可选(Optional)
        Repeat 1

        To specify a reference.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 1

        To identify a place or a location and/or related locations.

      • TPL
        TRANSPORT PLACEMENT
        O可选(Optional)
        Repeat 1

        To specify placement of goods or equipment in relation to the transport used. The segment serves as a pointer to the TDT segment group.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

  • GIDLoop1GOODS ITEM DETAILS LOOPO可选(Optional)Repeat 999
    GIDHANTMPRNGTMDLOCFTXPCDNADLoop2GDSMEALoop1DIMLoop1RFFLoop3DOCLoop1DGSLoop1
    • GID
      GOODS ITEM DETAILS
      M必须(Mandatory)
      Repeat 1

      To indicate totals of a goods item.

    • HAN
      HANDLING INSTRUCTIONS
      O可选(Optional)
      Repeat 1

      To specify handling and where necessary, notify hazards.

    • TMP
      TEMPERATURE
      O可选(Optional)
      Repeat 1

      To specify the temperature setting.

    • RNG
      RANGE DETAILS
      O可选(Optional)
      Repeat 1

      To identify a range.

    • TMD
      TRANSPORT MOVEMENT DETAILS
      O可选(Optional)
      Repeat 1

      To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions).

    • LOC
      PLACE/LOCATION IDENTIFICATION
      O可选(Optional)
      Repeat 9

      To identify a place or a location and/or related locations.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 9

      To provide free form or coded text information.

    • PCD
      PERCENTAGE DETAILS
      O可选(Optional)
      Repeat 9

      To specify percentage information.

    • NADLoop2NAME AND ADDRESS LOOPO可选(Optional)Repeat 9
      NADDTM
      • NAD
        NAME AND ADDRESS
        M必须(Mandatory)
        Repeat 1

        To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 1

        To specify date, and/or time, or period.

    • GDS
      NATURE OF CARGO
      O可选(Optional)
      Repeat 9

      To indicate the type of cargo as a general classification.

    • MEALoop1MEASUREMENTS LOOPO可选(Optional)Repeat 99
      MEAEQN
      • MEA
        MEASUREMENTS
        M必须(Mandatory)
        Repeat 1

        To specify physical measurements, including dimension tolerances, weights and counts.

      • EQN
        NUMBER OF UNITS
        O可选(Optional)
        Repeat 1

        To specify the number of units.

    • DIMLoop1DIMENSIONS LOOPO可选(Optional)Repeat 99
      DIMEQN
      • DIM
        DIMENSIONS
        M必须(Mandatory)
        Repeat 1

        To specify dimensions.

      • EQN
        NUMBER OF UNITS
        O可选(Optional)
        Repeat 1

        To specify the number of units.

    • RFFLoop3REFERENCE LOOPO可选(Optional)Repeat 9
      RFFDTM
      • RFF
        REFERENCE
        M必须(Mandatory)
        Repeat 1

        To specify a reference.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

    • DOCLoop1DOCUMENT/MESSAGE DETAILS LOOPO可选(Optional)Repeat 9
      DOCDTM
      • DOC
        DOCUMENT/MESSAGE DETAILS
        M必须(Mandatory)
        Repeat 1

        To identify documents and details directly related to it.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

    • DGSLoop1DANGEROUS GOODS LOOPO可选(Optional)Repeat 99
      DGSFTXCTALoop2MEALoop2
      • DGS
        DANGEROUS GOODS
        M必须(Mandatory)
        Repeat 1

        To identify dangerous goods.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 99

        To provide free form or coded text information.

      • CTALoop2CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
        CTACOM
        • CTA
          CONTACT INFORMATION
          M必须(Mandatory)
          Repeat 1

          To identify a person or a department to whom communication should be directed.

        • COM
          COMMUNICATION CONTACT
          O可选(Optional)
          Repeat 9

          To identify a communication number of a department or a person to whom communication should be directed.

      • MEALoop2MEASUREMENTS LOOPO可选(Optional)Repeat 9
        MEAEQN
        • MEA
          MEASUREMENTS
          M必须(Mandatory)
          Repeat 1

          To specify physical measurements, including dimension tolerances, weights and counts.

        • EQN
          NUMBER OF UNITS
          O可选(Optional)
          Repeat 1

          To specify the number of units.

  • EQDLoop1EQUIPMENT DETAILS LOOPO可选(Optional)Repeat 999
    EQDEQNTMDMEADIMHANTMPRNGFTXRFFNADLoop3DGSLoop2
    • EQD
      EQUIPMENT DETAILS
      M必须(Mandatory)
      Repeat 1

      To identify a unit of equipment.

    • EQN
      NUMBER OF UNITS
      O可选(Optional)
      Repeat 1

      To specify the number of units.

    • TMD
      TRANSPORT MOVEMENT DETAILS
      O可选(Optional)
      Repeat 1

      To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions).

    • MEA
      MEASUREMENTS
      O可选(Optional)
      Repeat 9

      To specify physical measurements, including dimension tolerances, weights and counts.

    • DIM
      DIMENSIONS
      O可选(Optional)
      Repeat 9

      To specify dimensions.

    • HAN
      HANDLING INSTRUCTIONS
      O可选(Optional)
      Repeat 1

      To specify handling and where necessary, notify hazards.

    • TMP
      TEMPERATURE
      O可选(Optional)
      Repeat 1

      To specify the temperature setting.

    • RNG
      RANGE DETAILS
      O可选(Optional)
      Repeat 9

      To identify a range.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 9

      To provide free form or coded text information.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 9

      To specify a reference.

    • NADLoop3NAME AND ADDRESS LOOPO可选(Optional)Repeat 9
      NADDTM
      • NAD
        NAME AND ADDRESS
        M必须(Mandatory)
        Repeat 1

        To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 1

        To specify date, and/or time, or period.

    • DGSLoop2DANGEROUS GOODS LOOPO可选(Optional)Repeat 99
      DGSFTXCTALoop3
      • DGS
        DANGEROUS GOODS
        M必须(Mandatory)
        Repeat 1

        To identify dangerous goods.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

      • CTALoop3CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
        CTACOM
        • CTA
          CONTACT INFORMATION
          M必须(Mandatory)
          Repeat 1

          To identify a person or a department to whom communication should be directed.

        • COM
          COMMUNICATION CONTACT
          O可选(Optional)
          Repeat 9

          To identify a communication number of a department or a person to whom communication should be directed.

  • UNT
    M必须(Mandatory)
    Repeat 1

    To end and check the completeness of a message.

Segment
EDIFACT EDI Release D06A
To head, identify and specify a message.
Elements
  • UNH010062MESSAGE REFERENCE NUMBER
    AN
    M必须(Mandatory)
    Min 0 / Max 14

    Unique message reference assigned by the sender.

  • UNH02S009MESSAGE IDENTIFIERM必须(Mandatory)
    0065005200540051005701100113
    • UNH02010065Message type
      ID
      M必须(Mandatory)
      Min 0 / Max 6

      Code identifying a type of message and assigned by its controlling agency.

      Codes (210)
    • UNH02020052Message version number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Version number of a message type.

      Codes (8)
    • UNH02030054Message release number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Release number within the current message version number.

      Codes (55)
    • UNH02040051Controlling agency, coded
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
    • UNH02050057Association assigned code
      AN
      O可选(Optional)
      Min 0 / Max 6

      Code, assigned by the association responsible for the design and maintenance of the message type concerned, which further identifies the message.

    • UNH02060110Code list directory version number
      AN
      O可选(Optional)
      Min 0 / Max 6

      Version number of the code list directory.

    • UNH02070113Message type sub-function identification
      ID
      O可选(Optional)
      Min 0 / Max 6

      Code identifying a sub-function of a message type.

      Codes (21)
  • UNH030068COMMON ACCESS REFERENCE
    AN
    O可选(Optional)
    Min 0 / Max 35

    Reference serving as a key to relate all subsequent transfers of data to the same business case or file.

  • UNH04S010STATUS OF THE TRANSFERO可选(Optional)
    00700073
    • UNH04010070Sequence of transfers
      N
      M必须(Mandatory)
      Min 0 / Max 2

      Number assigned by the sender indicating the transfer sequence of a message related to the same topic. The message could be an addition or a change to an earlier transfer related to the same topic.

    • UNH04020073First and last transfer
      ID
      O可选(Optional)
      Min 1 / Max 1

      Indication used for the first and last message in a sequence of messages related to the same topic.

      Codes (2)
  • UNH05S016MESSAGE SUBSET IDENTIFICATIONO可选(Optional)
    0115011601180051
    • UNH05010115Message subset identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of a message subset, assigned by its controlling agency.

    • UNH05020116Message subset version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message subset.

    • UNH05030118Message subset release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message subset version number.

    • UNH05040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH06S017MESSAGE IMPLEMENTATION GUIDELINE IDENTIFICATIONO可选(Optional)
    0121012201240051
    • UNH06010121Message implementation guideline identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of the message implementation guideline, assigned by its controlling agency.

    • UNH06020122Message implementation guideline version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message implementation guideline.

    • UNH06030124Message implementation guideline release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message implementation guideline version number.

    • UNH06040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH07S018SCENARIO IDENTIFICATIONO可选(Optional)
    0127012801300051
    • UNH07010127Scenario identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Code identifying scenario.

    • UNH07020128Scenario version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of a scenario.

    • UNH07030130Scenario release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the scenario version number.

    • UNH07040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)