IFCSUMForwarding and consolidation summary

A message to be used for consolidation purposes from a party arranging forwarding and transport services to the party for which the transport of the consolidated cargo is destined. The message can be used to exchange information concerning the consolidated cargo between forwarders, carriers and agents enabling those parties to handle the consignments included in this consolidation. In addition it can be used for a collection of consignments originating from one shipper for forwarding and transport services. In addition it can be used for an advice of insurance related to a consolidation of consignments if the insured is the party arranging forwarding and transport services.

  • UNH
    M必须(Mandatory)
    Repeat 1

    To head, identify and specify a message.

  • BGM
    BEGINNING OF MESSAGE
    M必须(Mandatory)
    Repeat 1

    To indicate the type and function of a message and to transmit the identifying number.

  • DTM
    DATE/TIME/PERIOD
    O可选(Optional)
    Repeat 9

    To specify date, and/or time, or period.

  • MOA
    MONETARY AMOUNT
    O可选(Optional)
    Repeat 99

    To specify a monetary amount.

  • FTX
    FREE TEXT
    O可选(Optional)
    Repeat 99

    To provide free form or coded text information.

  • CNT
    CONTROL TOTAL
    O可选(Optional)
    Repeat 9

    To provide control total.

  • PCD
    PERCENTAGE DETAILS
    O可选(Optional)
    Repeat 1

    To specify percentage information.

  • GDS
    NATURE OF CARGO
    O可选(Optional)
    Repeat 9

    To indicate the type of cargo as a general classification.

  • RFFLoop1REFERENCE LOOPO可选(Optional)Repeat 9
    RFFDTM
    • RFF
      REFERENCE
      M必须(Mandatory)
      Repeat 1

      To specify a reference.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

  • GORLoop1GOVERNMENTAL REQUIREMENTS LOOPO可选(Optional)Repeat 9
    GORDTMLOCSELFTXDOCLoop1
    • GOR
      GOVERNMENTAL REQUIREMENTS
      M必须(Mandatory)
      Repeat 1

      To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

    • LOC
      PLACE/LOCATION IDENTIFICATION
      O可选(Optional)
      Repeat 9

      To identify a place or a location and/or related locations.

    • SEL
      SEAL NUMBER
      O可选(Optional)
      Repeat 9

      To specify the seal number or a range of seal numbers.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 9

      To provide free form or coded text information.

    • DOCLoop1DOCUMENT/MESSAGE DETAILS LOOPO可选(Optional)Repeat 9
      DOCDTM
      • DOC
        DOCUMENT/MESSAGE DETAILS
        M必须(Mandatory)
        Repeat 1

        To identify documents and details directly related to it.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 1

        To specify date, and/or time, or period.

  • NADLoop1NAME AND ADDRESS LOOPO可选(Optional)Repeat 9
    NADCTALoop1RFFLoop2
    • NAD
      NAME AND ADDRESS
      M必须(Mandatory)
      Repeat 1

      To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    • CTALoop1CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
      CTACOM
      • CTA
        CONTACT INFORMATION
        M必须(Mandatory)
        Repeat 1

        To identify a person or a department to whom communication should be directed.

      • COM
        COMMUNICATION CONTACT
        O可选(Optional)
        Repeat 9

        To identify a communication number of a department or a person to whom communication should be directed.

    • RFFLoop2REFERENCE LOOPO可选(Optional)Repeat 9
      RFFDTM
      • RFF
        REFERENCE
        M必须(Mandatory)
        Repeat 1

        To specify a reference.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

  • TCCLoop1CHARGE/RATE CALCULATIONS LOOPO可选(Optional)Repeat 9
    TCCCUXPRIEQNPCDMOAQTYLOC
    • TCC
      CHARGE/RATE CALCULATIONS
      M必须(Mandatory)
      Repeat 1

      To specify charges.

    • CUX
      CURRENCIES
      O可选(Optional)
      Repeat 1

      To specify currencies used in the transaction and relevant details for the rate of exchange.

    • PRI
      PRICE DETAILS
      O可选(Optional)
      Repeat 1

      To specify price information.

    • EQN
      NUMBER OF UNITS
      O可选(Optional)
      Repeat 1

      To specify the number of units.

    • PCD
      PERCENTAGE DETAILS
      O可选(Optional)
      Repeat 1

      To specify percentage information.

    • MOA
      MONETARY AMOUNT
      O可选(Optional)
      Repeat 9

      To specify a monetary amount.

    • QTY
      QUANTITY
      O可选(Optional)
      Repeat 9

      To specify a pertinent quantity.

    • LOC
      PLACE/LOCATION IDENTIFICATION
      O可选(Optional)
      Repeat 9

      To identify a place or a location and/or related locations.

  • ICDLoop1INSURANCE COVER DESCRIPTION LOOPO可选(Optional)Repeat 99
    ICDDTMFTX
    • ICD
      INSURANCE COVER DESCRIPTION
      M必须(Mandatory)
      Repeat 1

      To describe the insurance cover.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 1

      To specify date, and/or time, or period.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 9

      To provide free form or coded text information.

  • TDTLoop1TRANSPORT INFORMATION LOOPO可选(Optional)Repeat 9
    TDTDTMTSRLOCLoop1SELFTXMEALoop1DIMLoop1CTALoop2TCCLoop2ICDLoop2RFFLoop3NADLoop2
    • TDT
      TRANSPORT INFORMATION
      M必须(Mandatory)
      Repeat 1

      To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

    • TSR
      TRANSPORT SERVICE REQUIREMENTS
      O可选(Optional)
      Repeat 9

      To specify the contract and carriage conditions and service and priority requirements for the transport.

    • LOCLoop1PLACE/LOCATION IDENTIFICATION LOOPO可选(Optional)Repeat 9
      LOCDTM
      • LOC
        PLACE/LOCATION IDENTIFICATION
        M必须(Mandatory)
        Repeat 1

        To identify a place or a location and/or related locations.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

    • SEL
      SEAL NUMBER
      O可选(Optional)
      Repeat 9

      To specify the seal number or a range of seal numbers.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 9

      To provide free form or coded text information.

    • MEALoop1MEASUREMENTS LOOPO可选(Optional)Repeat 9
      MEAEQN
      • MEA
        MEASUREMENTS
        M必须(Mandatory)
        Repeat 1

        To specify physical measurements, including dimension tolerances, weights and counts.

      • EQN
        NUMBER OF UNITS
        O可选(Optional)
        Repeat 1

        To specify the number of units.

    • DIMLoop1DIMENSIONS LOOPO可选(Optional)Repeat 9
      DIMEQN
      • DIM
        DIMENSIONS
        M必须(Mandatory)
        Repeat 1

        To specify dimensions.

      • EQN
        NUMBER OF UNITS
        O可选(Optional)
        Repeat 1

        To specify the number of units.

    • CTALoop2CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
      CTACOM
      • CTA
        CONTACT INFORMATION
        M必须(Mandatory)
        Repeat 1

        To identify a person or a department to whom communication should be directed.

      • COM
        COMMUNICATION CONTACT
        O可选(Optional)
        Repeat 9

        To identify a communication number of a department or a person to whom communication should be directed.

    • TCCLoop2CHARGE/RATE CALCULATIONS LOOPO可选(Optional)Repeat 99
      TCCMOAPCD
      • TCC
        CHARGE/RATE CALCULATIONS
        M必须(Mandatory)
        Repeat 1

        To specify charges.

      • MOA
        MONETARY AMOUNT
        O可选(Optional)
        Repeat 9

        To specify a monetary amount.

      • PCD
        PERCENTAGE DETAILS
        O可选(Optional)
        Repeat 1

        To specify percentage information.

    • ICDLoop2INSURANCE COVER DESCRIPTION LOOPO可选(Optional)Repeat 99
      ICDDTMFTX
      • ICD
        INSURANCE COVER DESCRIPTION
        M必须(Mandatory)
        Repeat 1

        To describe the insurance cover.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 1

        To specify date, and/or time, or period.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

    • RFFLoop3REFERENCE LOOPO可选(Optional)Repeat 9
      RFFDTM
      • RFF
        REFERENCE
        M必须(Mandatory)
        Repeat 1

        To specify a reference.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

    • NADLoop2NAME AND ADDRESS LOOPO可选(Optional)Repeat 9
      NADLOCCTALoop3DOCLoop2TCCLoop3RFFLoop4
      • NAD
        NAME AND ADDRESS
        M必须(Mandatory)
        Repeat 1

        To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 9

        To identify a place or a location and/or related locations.

      • CTALoop3CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
        CTACOM
        • CTA
          CONTACT INFORMATION
          M必须(Mandatory)
          Repeat 1

          To identify a person or a department to whom communication should be directed.

        • COM
          COMMUNICATION CONTACT
          O可选(Optional)
          Repeat 9

          To identify a communication number of a department or a person to whom communication should be directed.

      • DOCLoop2DOCUMENT/MESSAGE DETAILS LOOPO可选(Optional)Repeat 9
        DOCDTM
        • DOC
          DOCUMENT/MESSAGE DETAILS
          M必须(Mandatory)
          Repeat 1

          To identify documents and details directly related to it.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 1

          To specify date, and/or time, or period.

      • TCCLoop3CHARGE/RATE CALCULATIONS LOOPO可选(Optional)Repeat 9
        TCCCUXPRIEQNPCDMOAQTY
        • TCC
          CHARGE/RATE CALCULATIONS
          M必须(Mandatory)
          Repeat 1

          To specify charges.

        • CUX
          CURRENCIES
          O可选(Optional)
          Repeat 1

          To specify currencies used in the transaction and relevant details for the rate of exchange.

        • PRI
          PRICE DETAILS
          O可选(Optional)
          Repeat 1

          To specify price information.

        • EQN
          NUMBER OF UNITS
          O可选(Optional)
          Repeat 1

          To specify the number of units.

        • PCD
          PERCENTAGE DETAILS
          O可选(Optional)
          Repeat 1

          To specify percentage information.

        • MOA
          MONETARY AMOUNT
          O可选(Optional)
          Repeat 9

          To specify a monetary amount.

        • QTY
          QUANTITY
          O可选(Optional)
          Repeat 9

          To specify a pertinent quantity.

      • RFFLoop4REFERENCE LOOPO可选(Optional)Repeat 9
        RFFDTM
        • RFF
          REFERENCE
          M必须(Mandatory)
          Repeat 1

          To specify a reference.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 9

          To specify date, and/or time, or period.

  • EQDLoop1EQUIPMENT DETAILS LOOPO可选(Optional)Repeat 9999
    EQDEQNTPLTMDMEADIMSELNADLOCHANTMPFTXRFFPCDEQALoop1DGSLoop1
    • EQD
      EQUIPMENT DETAILS
      M必须(Mandatory)
      Repeat 1

      To identify a unit of equipment.

    • EQN
      NUMBER OF UNITS
      O可选(Optional)
      Repeat 1

      To specify the number of units.

    • TPL
      TRANSPORT PLACEMENT
      O可选(Optional)
      Repeat 1

      To specify placement of goods or equipment in relation to the transport used. The segment serves as a pointer to the TDT segment group.

    • TMD
      TRANSPORT MOVEMENT DETAILS
      O可选(Optional)
      Repeat 1

      To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions).

    • MEA
      MEASUREMENTS
      O可选(Optional)
      Repeat 9

      To specify physical measurements, including dimension tolerances, weights and counts.

    • DIM
      DIMENSIONS
      O可选(Optional)
      Repeat 9

      To specify dimensions.

    • SEL
      SEAL NUMBER
      O可选(Optional)
      Repeat 9

      To specify the seal number or a range of seal numbers.

    • NAD
      NAME AND ADDRESS
      O可选(Optional)
      Repeat 9

      To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    • LOC
      PLACE/LOCATION IDENTIFICATION
      O可选(Optional)
      Repeat 9

      To identify a place or a location and/or related locations.

    • HAN
      HANDLING INSTRUCTIONS
      O可选(Optional)
      Repeat 1

      To specify handling and where necessary, notify hazards.

    • TMP
      TEMPERATURE
      O可选(Optional)
      Repeat 1

      To specify the temperature setting.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 9

      To provide free form or coded text information.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 9

      To specify a reference.

    • PCD
      PERCENTAGE DETAILS
      O可选(Optional)
      Repeat 9

      To specify percentage information.

    • EQALoop1ATTACHED EQUIPMENT LOOPO可选(Optional)Repeat 99
      EQAEQN
      • EQA
        ATTACHED EQUIPMENT
        M必须(Mandatory)
        Repeat 1

        To specify attached or related equipment.

      • EQN
        NUMBER OF UNITS
        O可选(Optional)
        Repeat 1

        To specify the number of units.

    • DGSLoop1DANGEROUS GOODS LOOPO可选(Optional)Repeat 99
      DGSFTXCTALoop4
      • DGS
        DANGEROUS GOODS
        M必须(Mandatory)
        Repeat 1

        To identify dangerous goods.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

      • CTALoop4CONTACT INFORMATION LOOPM必须(Mandatory)Repeat 1
        CTACOM
        • CTA
          CONTACT INFORMATION
          M必须(Mandatory)
          Repeat 1

          To identify a person or a department to whom communication should be directed.

        • COM
          COMMUNICATION CONTACT
          O可选(Optional)
          Repeat 9

          To identify a communication number of a department or a person to whom communication should be directed.

  • CNILoop1CONSIGNMENT INFORMATION LOOPO可选(Optional)Repeat 9999
    CNISGPLoop1TPLLoop1CTACOMDTMCNTTSRCUXPCDMOAFTXGDSLOCLoop2TODLoop1RFFLoop5GORLoop2CPILoop1TCCLoop4ICDLoop3TDTLoop2NADLoop3GIDLoop1EQDLoop2
    • CNI
      CONSIGNMENT INFORMATION
      M必须(Mandatory)
      Repeat 1

      To identify one consignment.

    • SGPLoop1SPLIT GOODS PLACEMENT LOOPO可选(Optional)Repeat 9
      SGPMEALoop2
      • SGP
        SPLIT GOODS PLACEMENT
        M必须(Mandatory)
        Repeat 1

        To specify the placement of goods in relation to equipment.

      • MEALoop2MEASUREMENTS LOOPO可选(Optional)Repeat 9
        MEAEQN
        • MEA
          MEASUREMENTS
          M必须(Mandatory)
          Repeat 1

          To specify physical measurements, including dimension tolerances, weights and counts.

        • EQN
          NUMBER OF UNITS
          O可选(Optional)
          Repeat 1

          To specify the number of units.

    • TPLLoop1TRANSPORT PLACEMENT LOOPO可选(Optional)Repeat 9
      TPLMEALoop3
      • TPL
        TRANSPORT PLACEMENT
        M必须(Mandatory)
        Repeat 1

        To specify placement of goods or equipment in relation to the transport used. The segment serves as a pointer to the TDT segment group.

      • MEALoop3MEASUREMENTS LOOPO可选(Optional)Repeat 9
        MEAEQN
        • MEA
          MEASUREMENTS
          M必须(Mandatory)
          Repeat 1

          To specify physical measurements, including dimension tolerances, weights and counts.

        • EQN
          NUMBER OF UNITS
          O可选(Optional)
          Repeat 1

          To specify the number of units.

    • CTA
      CONTACT INFORMATION
      O可选(Optional)
      Repeat 1

      To identify a person or a department to whom communication should be directed.

    • COM
      COMMUNICATION CONTACT
      O可选(Optional)
      Repeat 9

      To identify a communication number of a department or a person to whom communication should be directed.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

    • CNT
      CONTROL TOTAL
      O可选(Optional)
      Repeat 9

      To provide control total.

    • TSR
      TRANSPORT SERVICE REQUIREMENTS
      O可选(Optional)
      Repeat 9

      To specify the contract and carriage conditions and service and priority requirements for the transport.

    • CUX
      CURRENCIES
      O可选(Optional)
      Repeat 9

      To specify currencies used in the transaction and relevant details for the rate of exchange.

    • PCD
      PERCENTAGE DETAILS
      O可选(Optional)
      Repeat 9

      To specify percentage information.

    • MOA
      MONETARY AMOUNT
      O可选(Optional)
      Repeat 99

      To specify a monetary amount.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 99

      To provide free form or coded text information.

    • GDS
      NATURE OF CARGO
      O可选(Optional)
      Repeat 9

      To indicate the type of cargo as a general classification.

    • LOCLoop2PLACE/LOCATION IDENTIFICATION LOOPO可选(Optional)Repeat 99
      LOCDTM
      • LOC
        PLACE/LOCATION IDENTIFICATION
        M必须(Mandatory)
        Repeat 1

        To identify a place or a location and/or related locations.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

    • TODLoop1TERMS OF DELIVERY OR TRANSPORT LOOPO可选(Optional)Repeat 2
      TODLOC
      • TOD
        TERMS OF DELIVERY OR TRANSPORT
        M必须(Mandatory)
        Repeat 1

        To specify terms of delivery or transport.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 9

        To identify a place or a location and/or related locations.

    • RFFLoop5REFERENCE LOOPO可选(Optional)Repeat 999
      RFFDTM
      • RFF
        REFERENCE
        M必须(Mandatory)
        Repeat 1

        To specify a reference.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

    • GORLoop2GOVERNMENTAL REQUIREMENTS LOOPO可选(Optional)Repeat 9
      GORDTMLOCSELFTXDOCLoop3
      • GOR
        GOVERNMENTAL REQUIREMENTS
        M必须(Mandatory)
        Repeat 1

        To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 9

        To identify a place or a location and/or related locations.

      • SEL
        SEAL NUMBER
        O可选(Optional)
        Repeat 9

        To specify the seal number or a range of seal numbers.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

      • DOCLoop3DOCUMENT/MESSAGE DETAILS LOOPO可选(Optional)Repeat 9
        DOCDTM
        • DOC
          DOCUMENT/MESSAGE DETAILS
          M必须(Mandatory)
          Repeat 1

          To identify documents and details directly related to it.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 1

          To specify date, and/or time, or period.

    • CPILoop1CHARGE PAYMENT INSTRUCTIONS LOOPO可选(Optional)Repeat 9
      CPIRFFCUXLOCMOA
      • CPI
        CHARGE PAYMENT INSTRUCTIONS
        M必须(Mandatory)
        Repeat 1

        To identify a charge.

      • RFF
        REFERENCE
        O可选(Optional)
        Repeat 99

        To specify a reference.

      • CUX
        CURRENCIES
        O可选(Optional)
        Repeat 1

        To specify currencies used in the transaction and relevant details for the rate of exchange.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 9

        To identify a place or a location and/or related locations.

      • MOA
        MONETARY AMOUNT
        O可选(Optional)
        Repeat 9

        To specify a monetary amount.

    • TCCLoop4CHARGE/RATE CALCULATIONS LOOPO可选(Optional)Repeat 99
      TCCLOCFTXCUXPRIEQNPCDMOAQTY
      • TCC
        CHARGE/RATE CALCULATIONS
        M必须(Mandatory)
        Repeat 1

        To specify charges.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 1

        To identify a place or a location and/or related locations.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 1

        To provide free form or coded text information.

      • CUX
        CURRENCIES
        O可选(Optional)
        Repeat 1

        To specify currencies used in the transaction and relevant details for the rate of exchange.

      • PRI
        PRICE DETAILS
        O可选(Optional)
        Repeat 1

        To specify price information.

      • EQN
        NUMBER OF UNITS
        O可选(Optional)
        Repeat 1

        To specify the number of units.

      • PCD
        PERCENTAGE DETAILS
        O可选(Optional)
        Repeat 1

        To specify percentage information.

      • MOA
        MONETARY AMOUNT
        O可选(Optional)
        Repeat 9

        To specify a monetary amount.

      • QTY
        QUANTITY
        O可选(Optional)
        Repeat 9

        To specify a pertinent quantity.

    • ICDLoop3INSURANCE COVER DESCRIPTION LOOPO可选(Optional)Repeat 99
      ICDDTMFTX
      • ICD
        INSURANCE COVER DESCRIPTION
        M必须(Mandatory)
        Repeat 1

        To describe the insurance cover.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 1

        To specify date, and/or time, or period.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

    • TDTLoop2TRANSPORT INFORMATION LOOPO可选(Optional)Repeat 99
      TDTDTMTSRLOCLoop3RFFLoop6TCCLoop5ICDLoop4
      • TDT
        TRANSPORT INFORMATION
        M必须(Mandatory)
        Repeat 1

        To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

      • TSR
        TRANSPORT SERVICE REQUIREMENTS
        O可选(Optional)
        Repeat 9

        To specify the contract and carriage conditions and service and priority requirements for the transport.

      • LOCLoop3PLACE/LOCATION IDENTIFICATION LOOPO可选(Optional)Repeat 99
        LOCDTM
        • LOC
          PLACE/LOCATION IDENTIFICATION
          M必须(Mandatory)
          Repeat 1

          To identify a place or a location and/or related locations.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 9

          To specify date, and/or time, or period.

      • RFFLoop6REFERENCE LOOPO可选(Optional)Repeat 9
        RFFDTM
        • RFF
          REFERENCE
          M必须(Mandatory)
          Repeat 1

          To specify a reference.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 1

          To specify date, and/or time, or period.

      • TCCLoop5CHARGE/RATE CALCULATIONS LOOPO可选(Optional)Repeat 99
        TCCMOAPCD
        • TCC
          CHARGE/RATE CALCULATIONS
          M必须(Mandatory)
          Repeat 1

          To specify charges.

        • MOA
          MONETARY AMOUNT
          O可选(Optional)
          Repeat 9

          To specify a monetary amount.

        • PCD
          PERCENTAGE DETAILS
          O可选(Optional)
          Repeat 1

          To specify percentage information.

      • ICDLoop4INSURANCE COVER DESCRIPTION LOOPO可选(Optional)Repeat 99
        ICDDTMFTX
        • ICD
          INSURANCE COVER DESCRIPTION
          M必须(Mandatory)
          Repeat 1

          To describe the insurance cover.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 1

          To specify date, and/or time, or period.

        • FTX
          FREE TEXT
          O可选(Optional)
          Repeat 9

          To provide free form or coded text information.

    • NADLoop3NAME AND ADDRESS LOOPO可选(Optional)Repeat 99
      NADLOCMOACTALoop5DOCLoop4TCCLoop6RFFLoop7CPILoop2TSRLoop1
      • NAD
        NAME AND ADDRESS
        M必须(Mandatory)
        Repeat 1

        To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 9

        To identify a place or a location and/or related locations.

      • MOA
        MONETARY AMOUNT
        O可选(Optional)
        Repeat 9

        To specify a monetary amount.

      • CTALoop5CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
        CTACOM
        • CTA
          CONTACT INFORMATION
          M必须(Mandatory)
          Repeat 1

          To identify a person or a department to whom communication should be directed.

        • COM
          COMMUNICATION CONTACT
          O可选(Optional)
          Repeat 9

          To identify a communication number of a department or a person to whom communication should be directed.

      • DOCLoop4DOCUMENT/MESSAGE DETAILS LOOPO可选(Optional)Repeat 9
        DOCDTM
        • DOC
          DOCUMENT/MESSAGE DETAILS
          M必须(Mandatory)
          Repeat 1

          To identify documents and details directly related to it.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 1

          To specify date, and/or time, or period.

      • TCCLoop6CHARGE/RATE CALCULATIONS LOOPO可选(Optional)Repeat 99
        TCCCUXPRIEQNPCDMOAQTY
        • TCC
          CHARGE/RATE CALCULATIONS
          M必须(Mandatory)
          Repeat 1

          To specify charges.

        • CUX
          CURRENCIES
          O可选(Optional)
          Repeat 1

          To specify currencies used in the transaction and relevant details for the rate of exchange.

        • PRI
          PRICE DETAILS
          O可选(Optional)
          Repeat 1

          To specify price information.

        • EQN
          NUMBER OF UNITS
          O可选(Optional)
          Repeat 1

          To specify the number of units.

        • PCD
          PERCENTAGE DETAILS
          O可选(Optional)
          Repeat 1

          To specify percentage information.

        • MOA
          MONETARY AMOUNT
          O可选(Optional)
          Repeat 9

          To specify a monetary amount.

        • QTY
          QUANTITY
          O可选(Optional)
          Repeat 9

          To specify a pertinent quantity.

      • RFFLoop7REFERENCE LOOPO可选(Optional)Repeat 9
        RFFDTM
        • RFF
          REFERENCE
          M必须(Mandatory)
          Repeat 1

          To specify a reference.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 9

          To specify date, and/or time, or period.

      • CPILoop2CHARGE PAYMENT INSTRUCTIONS LOOPO可选(Optional)Repeat 9
        CPIRFFCUXLOCMOA
        • CPI
          CHARGE PAYMENT INSTRUCTIONS
          M必须(Mandatory)
          Repeat 1

          To identify a charge.

        • RFF
          REFERENCE
          O可选(Optional)
          Repeat 99

          To specify a reference.

        • CUX
          CURRENCIES
          O可选(Optional)
          Repeat 1

          To specify currencies used in the transaction and relevant details for the rate of exchange.

        • LOC
          PLACE/LOCATION IDENTIFICATION
          O可选(Optional)
          Repeat 9

          To identify a place or a location and/or related locations.

        • MOA
          MONETARY AMOUNT
          O可选(Optional)
          Repeat 9

          To specify a monetary amount.

      • TSRLoop1TRANSPORT SERVICE REQUIREMENTS LOOPO可选(Optional)Repeat 99
        TSRRFFLOCTPLFTX
        • TSR
          TRANSPORT SERVICE REQUIREMENTS
          M必须(Mandatory)
          Repeat 1

          To specify the contract and carriage conditions and service and priority requirements for the transport.

        • RFF
          REFERENCE
          O可选(Optional)
          Repeat 1

          To specify a reference.

        • LOC
          PLACE/LOCATION IDENTIFICATION
          O可选(Optional)
          Repeat 1

          To identify a place or a location and/or related locations.

        • TPL
          TRANSPORT PLACEMENT
          O可选(Optional)
          Repeat 1

          To specify placement of goods or equipment in relation to the transport used. The segment serves as a pointer to the TDT segment group.

        • FTX
          FREE TEXT
          O可选(Optional)
          Repeat 9

          To provide free form or coded text information.

    • GIDLoop1GOODS ITEM DETAILS LOOPO可选(Optional)Repeat 999
      GIDHANTMPRNGTMDLOCMOAPIAGINFTXNADLoop4GDSMEALoop4DIMLoop2RFFLoop8PCILoop1DOCLoop5GORLoop3TPLLoop2SGPLoop2TCCLoop7ICDLoop5DGSLoop2
      • GID
        GOODS ITEM DETAILS
        M必须(Mandatory)
        Repeat 1

        To indicate totals of a goods item.

      • HAN
        HANDLING INSTRUCTIONS
        O可选(Optional)
        Repeat 1

        To specify handling and where necessary, notify hazards.

      • TMP
        TEMPERATURE
        O可选(Optional)
        Repeat 1

        To specify the temperature setting.

      • RNG
        RANGE DETAILS
        O可选(Optional)
        Repeat 1

        To identify a range.

      • TMD
        TRANSPORT MOVEMENT DETAILS
        O可选(Optional)
        Repeat 1

        To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions).

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 9

        To identify a place or a location and/or related locations.

      • MOA
        MONETARY AMOUNT
        O可选(Optional)
        Repeat 9

        To specify a monetary amount.

      • PIA
        ADDITIONAL PRODUCT ID
        O可选(Optional)
        Repeat 9

        To specify additional or substitutional item identification codes.

      • GIN
        GOODS IDENTITY NUMBER
        O可选(Optional)
        Repeat 99

        To give specific identification numbers, either as single numbers or ranges.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

      • NADLoop4NAME AND ADDRESS LOOPO可选(Optional)Repeat 9
        NADDTM
        • NAD
          NAME AND ADDRESS
          M必须(Mandatory)
          Repeat 1

          To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 1

          To specify date, and/or time, or period.

      • GDS
        NATURE OF CARGO
        O可选(Optional)
        Repeat 9

        To indicate the type of cargo as a general classification.

      • MEALoop4MEASUREMENTS LOOPO可选(Optional)Repeat 99
        MEAEQN
        • MEA
          MEASUREMENTS
          M必须(Mandatory)
          Repeat 1

          To specify physical measurements, including dimension tolerances, weights and counts.

        • EQN
          NUMBER OF UNITS
          O可选(Optional)
          Repeat 1

          To specify the number of units.

      • DIMLoop2DIMENSIONS LOOPO可选(Optional)Repeat 99
        DIMEQN
        • DIM
          DIMENSIONS
          M必须(Mandatory)
          Repeat 1

          To specify dimensions.

        • EQN
          NUMBER OF UNITS
          O可选(Optional)
          Repeat 1

          To specify the number of units.

      • RFFLoop8REFERENCE LOOPO可选(Optional)Repeat 9
        RFFDTM
        • RFF
          REFERENCE
          M必须(Mandatory)
          Repeat 1

          To specify a reference.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 9

          To specify date, and/or time, or period.

      • PCILoop1PACKAGE IDENTIFICATION LOOPO可选(Optional)Repeat 999
        PCIRFFDTMGINMEADIMFTX
        • PCI
          PACKAGE IDENTIFICATION
          M必须(Mandatory)
          Repeat 1

          To specify markings and labels on individual packages or physical units.

        • RFF
          REFERENCE
          O可选(Optional)
          Repeat 1

          To specify a reference.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 1

          To specify date, and/or time, or period.

        • GIN
          GOODS IDENTITY NUMBER
          O可选(Optional)
          Repeat 9

          To give specific identification numbers, either as single numbers or ranges.

        • MEA
          MEASUREMENTS
          O可选(Optional)
          Repeat 9

          To specify physical measurements, including dimension tolerances, weights and counts.

        • DIM
          DIMENSIONS
          O可选(Optional)
          Repeat 1

          To specify dimensions.

        • FTX
          FREE TEXT
          O可选(Optional)
          Repeat 9

          To provide free form or coded text information.

      • DOCLoop5DOCUMENT/MESSAGE DETAILS LOOPO可选(Optional)Repeat 9
        DOCDTM
        • DOC
          DOCUMENT/MESSAGE DETAILS
          M必须(Mandatory)
          Repeat 1

          To identify documents and details directly related to it.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 9

          To specify date, and/or time, or period.

      • GORLoop3GOVERNMENTAL REQUIREMENTS LOOPO可选(Optional)Repeat 9
        GORDTMLOCSELFTXDOCLoop6
        • GOR
          GOVERNMENTAL REQUIREMENTS
          M必须(Mandatory)
          Repeat 1

          To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 9

          To specify date, and/or time, or period.

        • LOC
          PLACE/LOCATION IDENTIFICATION
          O可选(Optional)
          Repeat 9

          To identify a place or a location and/or related locations.

        • SEL
          SEAL NUMBER
          O可选(Optional)
          Repeat 9

          To specify the seal number or a range of seal numbers.

        • FTX
          FREE TEXT
          O可选(Optional)
          Repeat 9

          To provide free form or coded text information.

        • DOCLoop6DOCUMENT/MESSAGE DETAILS LOOPO可选(Optional)Repeat 9
          DOCDTM
          • DOC
            DOCUMENT/MESSAGE DETAILS
            M必须(Mandatory)
            Repeat 1

            To identify documents and details directly related to it.

          • DTM
            DATE/TIME/PERIOD
            O可选(Optional)
            Repeat 1

            To specify date, and/or time, or period.

      • TPLLoop2TRANSPORT PLACEMENT LOOPO可选(Optional)Repeat 9
        TPLMEALoop5
        • TPL
          TRANSPORT PLACEMENT
          M必须(Mandatory)
          Repeat 1

          To specify placement of goods or equipment in relation to the transport used. The segment serves as a pointer to the TDT segment group.

        • MEALoop5MEASUREMENTS LOOPO可选(Optional)Repeat 9
          MEAEQN
          • MEA
            MEASUREMENTS
            M必须(Mandatory)
            Repeat 1

            To specify physical measurements, including dimension tolerances, weights and counts.

          • EQN
            NUMBER OF UNITS
            O可选(Optional)
            Repeat 1

            To specify the number of units.

      • SGPLoop2SPLIT GOODS PLACEMENT LOOPO可选(Optional)Repeat 999
        SGPSEQMEALoop6
        • SGP
          SPLIT GOODS PLACEMENT
          M必须(Mandatory)
          Repeat 1

          To specify the placement of goods in relation to equipment.

        • SEQ
          SEQUENCE DETAILS
          O可选(Optional)
          Repeat 1

          To provide details relating to the sequence.

        • MEALoop6MEASUREMENTS LOOPO可选(Optional)Repeat 9
          MEAEQN
          • MEA
            MEASUREMENTS
            M必须(Mandatory)
            Repeat 1

            To specify physical measurements, including dimension tolerances, weights and counts.

          • EQN
            NUMBER OF UNITS
            O可选(Optional)
            Repeat 1

            To specify the number of units.

      • TCCLoop7CHARGE/RATE CALCULATIONS LOOPO可选(Optional)Repeat 99
        TCCCUXPRIEQNPCDMOAQTYLOC
        • TCC
          CHARGE/RATE CALCULATIONS
          M必须(Mandatory)
          Repeat 1

          To specify charges.

        • CUX
          CURRENCIES
          O可选(Optional)
          Repeat 1

          To specify currencies used in the transaction and relevant details for the rate of exchange.

        • PRI
          PRICE DETAILS
          O可选(Optional)
          Repeat 1

          To specify price information.

        • EQN
          NUMBER OF UNITS
          O可选(Optional)
          Repeat 1

          To specify the number of units.

        • PCD
          PERCENTAGE DETAILS
          O可选(Optional)
          Repeat 1

          To specify percentage information.

        • MOA
          MONETARY AMOUNT
          O可选(Optional)
          Repeat 9

          To specify a monetary amount.

        • QTY
          QUANTITY
          O可选(Optional)
          Repeat 9

          To specify a pertinent quantity.

        • LOC
          PLACE/LOCATION IDENTIFICATION
          O可选(Optional)
          Repeat 9

          To identify a place or a location and/or related locations.

      • ICDLoop5INSURANCE COVER DESCRIPTION LOOPO可选(Optional)Repeat 99
        ICDDTMFTX
        • ICD
          INSURANCE COVER DESCRIPTION
          M必须(Mandatory)
          Repeat 1

          To describe the insurance cover.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 1

          To specify date, and/or time, or period.

        • FTX
          FREE TEXT
          O可选(Optional)
          Repeat 9

          To provide free form or coded text information.

      • DGSLoop2DANGEROUS GOODS LOOPO可选(Optional)Repeat 99
        DGSFTXCTALoop6MEALoop7SGPLoop3
        • DGS
          DANGEROUS GOODS
          M必须(Mandatory)
          Repeat 1

          To identify dangerous goods.

        • FTX
          FREE TEXT
          O可选(Optional)
          Repeat 99

          To provide free form or coded text information.

        • CTALoop6CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
          CTACOM
          • CTA
            CONTACT INFORMATION
            M必须(Mandatory)
            Repeat 1

            To identify a person or a department to whom communication should be directed.

          • COM
            COMMUNICATION CONTACT
            O可选(Optional)
            Repeat 9

            To identify a communication number of a department or a person to whom communication should be directed.

        • MEALoop7MEASUREMENTS LOOPO可选(Optional)Repeat 9
          MEAEQN
          • MEA
            MEASUREMENTS
            M必须(Mandatory)
            Repeat 1

            To specify physical measurements, including dimension tolerances, weights and counts.

          • EQN
            NUMBER OF UNITS
            O可选(Optional)
            Repeat 1

            To specify the number of units.

        • SGPLoop3SPLIT GOODS PLACEMENT LOOPO可选(Optional)Repeat 999
          SGPMEALoop8
          • SGP
            SPLIT GOODS PLACEMENT
            M必须(Mandatory)
            Repeat 1

            To specify the placement of goods in relation to equipment.

          • MEALoop8MEASUREMENTS LOOPO可选(Optional)Repeat 9
            MEAEQN
            • MEA
              MEASUREMENTS
              M必须(Mandatory)
              Repeat 1

              To specify physical measurements, including dimension tolerances, weights and counts.

            • EQN
              NUMBER OF UNITS
              O可选(Optional)
              Repeat 1

              To specify the number of units.

    • EQDLoop2EQUIPMENT DETAILS LOOPO可选(Optional)Repeat 999
      EQDEQNTMDMEADIMSELTPLHANTMPFTXPCDTCCLoop8NADLoop5EQALoop2DGSLoop3
      • EQD
        EQUIPMENT DETAILS
        M必须(Mandatory)
        Repeat 1

        To identify a unit of equipment.

      • EQN
        NUMBER OF UNITS
        O可选(Optional)
        Repeat 1

        To specify the number of units.

      • TMD
        TRANSPORT MOVEMENT DETAILS
        O可选(Optional)
        Repeat 1

        To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions).

      • MEA
        MEASUREMENTS
        O可选(Optional)
        Repeat 9

        To specify physical measurements, including dimension tolerances, weights and counts.

      • DIM
        DIMENSIONS
        O可选(Optional)
        Repeat 9

        To specify dimensions.

      • SEL
        SEAL NUMBER
        O可选(Optional)
        Repeat 99

        To specify the seal number or a range of seal numbers.

      • TPL
        TRANSPORT PLACEMENT
        O可选(Optional)
        Repeat 9

        To specify placement of goods or equipment in relation to the transport used. The segment serves as a pointer to the TDT segment group.

      • HAN
        HANDLING INSTRUCTIONS
        O可选(Optional)
        Repeat 1

        To specify handling and where necessary, notify hazards.

      • TMP
        TEMPERATURE
        O可选(Optional)
        Repeat 1

        To specify the temperature setting.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

      • PCD
        PERCENTAGE DETAILS
        O可选(Optional)
        Repeat 9

        To specify percentage information.

      • TCCLoop8CHARGE/RATE CALCULATIONS LOOPO可选(Optional)Repeat 99
        TCCCUXPRIEQNPCDMOAQTY
        • TCC
          CHARGE/RATE CALCULATIONS
          M必须(Mandatory)
          Repeat 1

          To specify charges.

        • CUX
          CURRENCIES
          O可选(Optional)
          Repeat 1

          To specify currencies used in the transaction and relevant details for the rate of exchange.

        • PRI
          PRICE DETAILS
          O可选(Optional)
          Repeat 1

          To specify price information.

        • EQN
          NUMBER OF UNITS
          O可选(Optional)
          Repeat 1

          To specify the number of units.

        • PCD
          PERCENTAGE DETAILS
          O可选(Optional)
          Repeat 1

          To specify percentage information.

        • MOA
          MONETARY AMOUNT
          O可选(Optional)
          Repeat 9

          To specify a monetary amount.

        • QTY
          QUANTITY
          O可选(Optional)
          Repeat 9

          To specify a pertinent quantity.

      • NADLoop5NAME AND ADDRESS LOOPO可选(Optional)Repeat 9
        NADDTM
        • NAD
          NAME AND ADDRESS
          M必须(Mandatory)
          Repeat 1

          To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 1

          To specify date, and/or time, or period.

      • EQALoop2ATTACHED EQUIPMENT LOOPO可选(Optional)Repeat 99
        EQAEQN
        • EQA
          ATTACHED EQUIPMENT
          M必须(Mandatory)
          Repeat 1

          To specify attached or related equipment.

        • EQN
          NUMBER OF UNITS
          O可选(Optional)
          Repeat 1

          To specify the number of units.

      • DGSLoop3DANGEROUS GOODS LOOPO可选(Optional)Repeat 99
        DGSFTXCTALoop7
        • DGS
          DANGEROUS GOODS
          M必须(Mandatory)
          Repeat 1

          To identify dangerous goods.

        • FTX
          FREE TEXT
          O可选(Optional)
          Repeat 9

          To provide free form or coded text information.

        • CTALoop7CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
          CTACOM
          • CTA
            CONTACT INFORMATION
            M必须(Mandatory)
            Repeat 1

            To identify a person or a department to whom communication should be directed.

          • COM
            COMMUNICATION CONTACT
            O可选(Optional)
            Repeat 9

            To identify a communication number of a department or a person to whom communication should be directed.

  • UNT
    M必须(Mandatory)
    Repeat 1

    To end and check the completeness of a message.

Segment
EDIFACT EDI Release D02B
To head, identify and specify a message.
Elements
  • UNH010062MESSAGE REFERENCE NUMBER
    AN
    M必须(Mandatory)
    Min 0 / Max 14

    Unique message reference assigned by the sender.

  • UNH02S009MESSAGE IDENTIFIERM必须(Mandatory)
    0065005200540051005701100113
    • UNH02010065Message type
      ID
      M必须(Mandatory)
      Min 0 / Max 6

      Code identifying a type of message and assigned by its controlling agency.

      Codes (212)
    • UNH02020052Message version number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Version number of a message type.

      Codes (8)
    • UNH02030054Message release number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Release number within the current message version number.

      Codes (55)
    • UNH02040051Controlling agency, coded
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
    • UNH02050057Association assigned code
      AN
      O可选(Optional)
      Min 0 / Max 6

      Code, assigned by the association responsible for the design and maintenance of the message type concerned, which further identifies the message.

    • UNH02060110Code list directory version number
      AN
      O可选(Optional)
      Min 0 / Max 6

      Version number of the code list directory.

    • UNH02070113Message type sub-function identification
      ID
      O可选(Optional)
      Min 0 / Max 6

      Code identifying a sub-function of a message type.

      Codes (21)
  • UNH030068COMMON ACCESS REFERENCE
    AN
    O可选(Optional)
    Min 0 / Max 35

    Reference serving as a key to relate all subsequent transfers of data to the same business case or file.

  • UNH04S010STATUS OF THE TRANSFERO可选(Optional)
    00700073
    • UNH04010070Sequence of transfers
      N
      M必须(Mandatory)
      Min 0 / Max 2

      Number assigned by the sender indicating the transfer sequence of a message related to the same topic. The message could be an addition or a change to an earlier transfer related to the same topic.

    • UNH04020073First and last transfer
      ID
      O可选(Optional)
      Min 1 / Max 1

      Indication used for the first and last message in a sequence of messages related to the same topic.

      Codes (2)
  • UNH05S016MESSAGE SUBSET IDENTIFICATIONO可选(Optional)
    0115011601180051
    • UNH05010115Message subset identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of a message subset, assigned by its controlling agency.

    • UNH05020116Message subset version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message subset.

    • UNH05030118Message subset release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message subset version number.

    • UNH05040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH06S017MESSAGE IMPLEMENTATION GUIDELINE IDENTIFICATIONO可选(Optional)
    0121012201240051
    • UNH06010121Message implementation guideline identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of the message implementation guideline, assigned by its controlling agency.

    • UNH06020122Message implementation guideline version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message implementation guideline.

    • UNH06030124Message implementation guideline release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message implementation guideline version number.

    • UNH06040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH07S018SCENARIO IDENTIFICATIONO可选(Optional)
    0127012801300051
    • UNH07010127Scenario identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Code identifying scenario.

    • UNH07020128Scenario version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of a scenario.

    • UNH07030130Scenario release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the scenario version number.

    • UNH07040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)