COPARNContainer announcement

The message contains an order to release, to make available, to accept or to call down containers or to announce the impending arrival of containers.

This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.

The order may pertain to cargo related containers (full container load and less than container load), the arrangement of empty containers prior to loading and after stripping, as well as the arrangements for leasing the empty containers (on- hire and off-hire of containers).

  • UNH
    M必须(Mandatory)
    Repeat 1

    To head, identify and specify a message.

  • BGM
    BEGINNING OF MESSAGE
    M必须(Mandatory)
    Repeat 1

    To indicate the type and function of a message and to transmit the identifying number.

  • TMD
    TRANSPORT MOVEMENT DETAILS
    O可选(Optional)
    Repeat 1

    To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions).

  • DTM
    DATE/TIME/PERIOD
    O可选(Optional)
    Repeat 9

    To specify date, and/or time, or period.

  • TSR
    TRANSPORT SERVICE REQUIREMENTS
    O可选(Optional)
    Repeat 9

    To specify the contract and carriage conditions and service and priority requirements for the transport.

  • FTX
    FREE TEXT
    O可选(Optional)
    Repeat 99

    To provide free form or coded text information.

  • LOC
    PLACE/LOCATION IDENTIFICATION
    O可选(Optional)
    Repeat 9

    To identify a place or a location and/or related locations.

  • RFFLoop1REFERENCE LOOPO可选(Optional)Repeat 9
    RFFDTM
    • RFF
      REFERENCE
      M必须(Mandatory)
      Repeat 1

      To specify a reference.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

  • TDTLoop1DETAILS OF TRANSPORT LOOPO可选(Optional)Repeat 9
    TDTDTMRFFLOCLoop1
    • TDT
      DETAILS OF TRANSPORT
      M必须(Mandatory)
      Repeat 1

      To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 9

      To specify a reference.

    • LOCLoop1PLACE/LOCATION IDENTIFICATION LOOPO可选(Optional)Repeat 9
      LOCDTM
      • LOC
        PLACE/LOCATION IDENTIFICATION
        M必须(Mandatory)
        Repeat 1

        To identify a place or a location and/or related locations.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

  • NADLoop1NAME AND ADDRESS LOOPM必须(Mandatory)Repeat 9
    NADCTALoop1RFFDTM
    • NAD
      NAME AND ADDRESS
      M必须(Mandatory)
      Repeat 1

      To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    • CTALoop1CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
      CTACOM
      • CTA
        CONTACT INFORMATION
        M必须(Mandatory)
        Repeat 1

        To identify a person or a department to whom communication should be directed.

      • COM
        COMMUNICATION CONTACT
        O可选(Optional)
        Repeat 9

        To identify a communication number of a department or a person to whom communication should be directed.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 9

      To specify a reference.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

  • GIDLoop1GOODS ITEM DETAILS LOOPO可选(Optional)Repeat 999
    GIDHANFTXRFFPIANADLoop2MEADIMDOCLoop1SGPLoop1DGSLoop1TMPLoop1
    • GID
      GOODS ITEM DETAILS
      M必须(Mandatory)
      Repeat 1

      To indicate totals of a goods item.

    • HAN
      HANDLING INSTRUCTIONS
      O可选(Optional)
      Repeat 9

      To specify handling and where necessary, notify hazards.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 9

      To provide free form or coded text information.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 9

      To specify a reference.

    • PIA
      ADDITIONAL PRODUCT ID
      O可选(Optional)
      Repeat 9

      To specify additional or substitutional item identification codes.

    • NADLoop2NAME AND ADDRESS LOOPO可选(Optional)Repeat 99
      NADDTMRFF
      • NAD
        NAME AND ADDRESS
        M必须(Mandatory)
        Repeat 1

        To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

      • RFF
        REFERENCE
        O可选(Optional)
        Repeat 9

        To specify a reference.

    • MEA
      MEASUREMENTS
      O可选(Optional)
      Repeat 9

      To specify physical measurements, including dimension tolerances, weights and counts.

    • DIM
      DIMENSIONS
      O可选(Optional)
      Repeat 9

      To specify dimensions.

    • DOCLoop1DOCUMENT/MESSAGE DETAILS LOOPO可选(Optional)Repeat 9
      DOCDTMLOC
      • DOC
        DOCUMENT/MESSAGE DETAILS
        M必须(Mandatory)
        Repeat 1

        To identify documents and details directly related to it.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 9

        To identify a place or a location and/or related locations.

    • SGPLoop1SPLIT GOODS PLACEMENT LOOPO可选(Optional)Repeat 999
      SGPMEA
      • SGP
        SPLIT GOODS PLACEMENT
        M必须(Mandatory)
        Repeat 1

        To specify the placement of goods in relation to equipment.

      • MEA
        MEASUREMENTS
        O可选(Optional)
        Repeat 9

        To specify physical measurements, including dimension tolerances, weights and counts.

    • DGSLoop1DANGEROUS GOODS LOOPO可选(Optional)Repeat 99
      DGSFTXMEACTALoop2
      • DGS
        DANGEROUS GOODS
        M必须(Mandatory)
        Repeat 1

        To identify dangerous goods.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

      • MEA
        MEASUREMENTS
        O可选(Optional)
        Repeat 9

        To specify physical measurements, including dimension tolerances, weights and counts.

      • CTALoop2CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
        CTACOM
        • CTA
          CONTACT INFORMATION
          M必须(Mandatory)
          Repeat 1

          To identify a person or a department to whom communication should be directed.

        • COM
          COMMUNICATION CONTACT
          O可选(Optional)
          Repeat 9

          To identify a communication number of a department or a person to whom communication should be directed.

    • TMPLoop1TEMPERATURE LOOPO可选(Optional)Repeat 9
      TMPRNG
      • TMP
        TEMPERATURE
        M必须(Mandatory)
        Repeat 1

        To specify the temperature setting.

      • RNG
        RANGE DETAILS
        O可选(Optional)
        Repeat 1

        To identify a range.

  • EQDLoop1EQUIPMENT DETAILS LOOPM必须(Mandatory)Repeat 9999
    EQDRFFEQNTMDDTMTSRLOCMEADIMTMPLoop2SELFTXPCDDGSLoop2MOAGOREQACODHANDAMLoop1TDTLoop2NADLoop3
    • EQD
      EQUIPMENT DETAILS
      M必须(Mandatory)
      Repeat 1

      To identify a unit of equipment.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 9

      To specify a reference.

    • EQN
      NUMBER OF UNITS
      O可选(Optional)
      Repeat 1

      To specify the number of units.

    • TMD
      TRANSPORT MOVEMENT DETAILS
      O可选(Optional)
      Repeat 9

      To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions).

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

    • TSR
      TRANSPORT SERVICE REQUIREMENTS
      O可选(Optional)
      Repeat 9

      To specify the contract and carriage conditions and service and priority requirements for the transport.

    • LOC
      PLACE/LOCATION IDENTIFICATION
      O可选(Optional)
      Repeat 9

      To identify a place or a location and/or related locations.

    • MEA
      MEASUREMENTS
      O可选(Optional)
      Repeat 9

      To specify physical measurements, including dimension tolerances, weights and counts.

    • DIM
      DIMENSIONS
      O可选(Optional)
      Repeat 9

      To specify dimensions.

    • TMPLoop2TEMPERATURE LOOPO可选(Optional)Repeat 9
      TMPRNG
      • TMP
        TEMPERATURE
        M必须(Mandatory)
        Repeat 1

        To specify the temperature setting.

      • RNG
        RANGE DETAILS
        O可选(Optional)
        Repeat 1

        To identify a range.

    • SEL
      SEAL NUMBER
      O可选(Optional)
      Repeat 9

      To specify the seal number or a range of seal numbers.

    • FTX
      FREE TEXT
      O可选(Optional)
      Repeat 9

      To provide free form or coded text information.

    • PCD
      PERCENTAGE DETAILS
      O可选(Optional)
      Repeat 9

      To specify percentage information.

    • DGSLoop2DANGEROUS GOODS LOOPO可选(Optional)Repeat 99
      DGSFTXMEACTALoop3
      • DGS
        DANGEROUS GOODS
        M必须(Mandatory)
        Repeat 1

        To identify dangerous goods.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

      • MEA
        MEASUREMENTS
        O可选(Optional)
        Repeat 9

        To specify physical measurements, including dimension tolerances, weights and counts.

      • CTALoop3CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
        CTACOM
        • CTA
          CONTACT INFORMATION
          M必须(Mandatory)
          Repeat 1

          To identify a person or a department to whom communication should be directed.

        • COM
          COMMUNICATION CONTACT
          O可选(Optional)
          Repeat 9

          To identify a communication number of a department or a person to whom communication should be directed.

    • MOA
      MONETARY AMOUNT
      O可选(Optional)
      Repeat 9

      To specify a monetary amount.

    • GOR
      GOVERNMENTAL REQUIREMENTS
      O可选(Optional)
      Repeat 9

      To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport.

    • EQA
      ATTACHED EQUIPMENT
      O可选(Optional)
      Repeat 1

      To specify attached or related equipment.

    • COD
      COMPONENT DETAILS
      O可选(Optional)
      Repeat 1

      To provide component details of an object (e.g. product, container) such as its type and the material of which it is composed.

    • HAN
      HANDLING INSTRUCTIONS
      O可选(Optional)
      Repeat 9

      To specify handling and where necessary, notify hazards.

    • DAMLoop1DAMAGE LOOPO可选(Optional)Repeat 9
      DAMCOD
      • DAM
        DAMAGE
        M必须(Mandatory)
        Repeat 1

        To specify damage including action taken.

      • COD
        COMPONENT DETAILS
        O可选(Optional)
        Repeat 1

        To provide component details of an object (e.g. product, container) such as its type and the material of which it is composed.

    • TDTLoop2DETAILS OF TRANSPORT LOOPO可选(Optional)Repeat 9
      TDTDTMLOCLoop2
      • TDT
        DETAILS OF TRANSPORT
        M必须(Mandatory)
        Repeat 1

        To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

      • LOCLoop2PLACE/LOCATION IDENTIFICATION LOOPO可选(Optional)Repeat 9
        LOCDTM
        • LOC
          PLACE/LOCATION IDENTIFICATION
          M必须(Mandatory)
          Repeat 1

          To identify a place or a location and/or related locations.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 9

          To specify date, and/or time, or period.

    • NADLoop3NAME AND ADDRESS LOOPO可选(Optional)Repeat 9
      NADDTMCTACOMRFF
      • NAD
        NAME AND ADDRESS
        M必须(Mandatory)
        Repeat 1

        To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 1

        To specify date, and/or time, or period.

      • CTA
        CONTACT INFORMATION
        O可选(Optional)
        Repeat 1

        To identify a person or a department to whom communication should be directed.

      • COM
        COMMUNICATION CONTACT
        O可选(Optional)
        Repeat 1

        To identify a communication number of a department or a person to whom communication should be directed.

      • RFF
        REFERENCE
        O可选(Optional)
        Repeat 9

        To specify a reference.

  • CNT
    CONTROL TOTAL
    O可选(Optional)
    Repeat 1

    To provide control total.

  • UNT
    M必须(Mandatory)
    Repeat 1

    To end and check the completeness of a message.

Segment
EDIFACT EDI Release D02A
To head, identify and specify a message.
Elements
  • UNH010062MESSAGE REFERENCE NUMBER
    AN
    M必须(Mandatory)
    Min 0 / Max 14

    Unique message reference assigned by the sender.

  • UNH02S009MESSAGE IDENTIFIERM必须(Mandatory)
    0065005200540051005701100113
    • UNH02010065Message type
      ID
      M必须(Mandatory)
      Min 0 / Max 6

      Code identifying a type of message and assigned by its controlling agency.

      Codes (212)
    • UNH02020052Message version number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Version number of a message type.

      Codes (8)
    • UNH02030054Message release number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Release number within the current message version number.

      Codes (55)
    • UNH02040051Controlling agency, coded
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
    • UNH02050057Association assigned code
      AN
      O可选(Optional)
      Min 0 / Max 6

      Code, assigned by the association responsible for the design and maintenance of the message type concerned, which further identifies the message.

    • UNH02060110Code list directory version number
      AN
      O可选(Optional)
      Min 0 / Max 6

      Version number of the code list directory.

    • UNH02070113Message type sub-function identification
      ID
      O可选(Optional)
      Min 0 / Max 6

      Code identifying a sub-function of a message type.

      Codes (21)
  • UNH030068COMMON ACCESS REFERENCE
    AN
    O可选(Optional)
    Min 0 / Max 35

    Reference serving as a key to relate all subsequent transfers of data to the same business case or file.

  • UNH04S010STATUS OF THE TRANSFERO可选(Optional)
    00700073
    • UNH04010070Sequence of transfers
      N
      M必须(Mandatory)
      Min 0 / Max 2

      Number assigned by the sender indicating the transfer sequence of a message related to the same topic. The message could be an addition or a change to an earlier transfer related to the same topic.

    • UNH04020073First and last transfer
      ID
      O可选(Optional)
      Min 1 / Max 1

      Indication used for the first and last message in a sequence of messages related to the same topic.

      Codes (2)
  • UNH05S016MESSAGE SUBSET IDENTIFICATIONO可选(Optional)
    0115011601180051
    • UNH05010115Message subset identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of a message subset, assigned by its controlling agency.

    • UNH05020116Message subset version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message subset.

    • UNH05030118Message subset release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message subset version number.

    • UNH05040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH06S017MESSAGE IMPLEMENTATION GUIDELINE IDENTIFICATIONO可选(Optional)
    0121012201240051
    • UNH06010121Message implementation guideline identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of the message implementation guideline, assigned by its controlling agency.

    • UNH06020122Message implementation guideline version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message implementation guideline.

    • UNH06030124Message implementation guideline release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message implementation guideline version number.

    • UNH06040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH07S018SCENARIO IDENTIFICATIONO可选(Optional)
    0127012801300051
    • UNH07010127Scenario identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Code identifying scenario.

    • UNH07020128Scenario version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of a scenario.

    • UNH07030130Scenario release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the scenario version number.

    • UNH07040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)