ITRRPTIn transit report detail

A message specifying to a delivery party, the details of goods within grouped consignments despatched by the delivering party. This message is used in a multi-step transportation process involving only consignors, grouping centres and consignees.

A grouping centre (consolidation point) is a logistic point where goods are moved from one means of transport to another, to optimize transport cost. This message is not to be used to identify additional services related to the despatched goods (warehousing, packaging, etc.) which may be provided by the third party at the same location along with the Grouping service.

  • UNH
    M必须(Mandatory)
    Repeat 1

    To head, identify and specify a message.

  • BGM
    BEGINNING OF MESSAGE
    M必须(Mandatory)
    Repeat 1

    To indicate the type and function of a message and to transmit the identifying number.

  • DTM
    DATE/TIME/PERIOD
    O可选(Optional)
    Repeat 10

    To specify date, and/or time, or period.

  • MEA
    MEASUREMENTS
    O可选(Optional)
    Repeat 5

    To specify physical measurements, including dimension tolerances, weights and counts.

  • CUX
    CURRENCIES
    O可选(Optional)
    Repeat 9

    To specify currencies used in the transaction and relevant details for the rate of exchange.

  • RFFLoop1REFERENCE LOOPO可选(Optional)Repeat 10
    RFFDTM
    • RFF
      REFERENCE
      M必须(Mandatory)
      Repeat 1

      To specify a reference.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 5

      To specify date, and/or time, or period.

  • NADLoop1NAME AND ADDRESS LOOPO可选(Optional)Repeat 10
    NADLOCRFFLoop2CTALoop1
    • NAD
      NAME AND ADDRESS
      M必须(Mandatory)
      Repeat 1

      To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    • LOC
      PLACE/LOCATION IDENTIFICATION
      O可选(Optional)
      Repeat 10

      To identify a place or a location and/or related locations.

    • RFFLoop2REFERENCE LOOPO可选(Optional)Repeat 10
      RFFDTM
      • RFF
        REFERENCE
        M必须(Mandatory)
        Repeat 1

        To specify a reference.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 5

        To specify date, and/or time, or period.

    • CTALoop1CONTACT INFORMATION LOOPO可选(Optional)Repeat 10
      CTACOM
      • CTA
        CONTACT INFORMATION
        M必须(Mandatory)
        Repeat 1

        To identify a person or a department to whom communication should be directed.

      • COM
        COMMUNICATION CONTACT
        O可选(Optional)
        Repeat 5

        To identify a communication number of a department or a person to whom communication should be directed.

  • TDTLoop1DETAILS OF TRANSPORT LOOPO可选(Optional)Repeat 10
    TDTPCDLOCLoop1
    • TDT
      DETAILS OF TRANSPORT
      M必须(Mandatory)
      Repeat 1

      To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment.

    • PCD
      PERCENTAGE DETAILS
      O可选(Optional)
      Repeat 5

      To specify percentage information.

    • LOCLoop1PLACE/LOCATION IDENTIFICATION LOOPO可选(Optional)Repeat 10
      LOCDTM
      • LOC
        PLACE/LOCATION IDENTIFICATION
        M必须(Mandatory)
        Repeat 1

        To identify a place or a location and/or related locations.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 10

        To specify date, and/or time, or period.

  • EQDLoop1EQUIPMENT DETAILS LOOPO可选(Optional)Repeat 10
    EQDMEASELEQAPCDHANLoop1
    • EQD
      EQUIPMENT DETAILS
      M必须(Mandatory)
      Repeat 1

      To identify a unit of equipment.

    • MEA
      MEASUREMENTS
      O可选(Optional)
      Repeat 5

      To specify physical measurements, including dimension tolerances, weights and counts.

    • SEL
      SEAL NUMBER
      O可选(Optional)
      Repeat 99

      To specify the seal number or a range of seal numbers.

    • EQA
      ATTACHED EQUIPMENT
      O可选(Optional)
      Repeat 5

      To specify attached or related equipment.

    • PCD
      PERCENTAGE DETAILS
      O可选(Optional)
      Repeat 5

      To specify percentage information.

    • HANLoop1HANDLING INSTRUCTIONS LOOPO可选(Optional)Repeat 10
      HANFTX
      • HAN
        HANDLING INSTRUCTIONS
        M必须(Mandatory)
        Repeat 1

        To specify handling and where necessary, notify hazards.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 10

        To provide free form or coded text information.

  • GISLoop1GENERAL INDICATOR LOOPM必须(Mandatory)Repeat 99
    GISCDIDTMALIMEAMOARFFLoop3NADLoop2TODLoop1CPSLoop1
    • GIS
      GENERAL INDICATOR
      M必须(Mandatory)
      Repeat 1

      To transmit a processing indicator.

    • CDI
      PHYSICAL OR LOGICAL STATE
      O可选(Optional)
      Repeat 1

      To describe a physical or logical state.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 10

      To specify date, and/or time, or period.

    • ALI
      ADDITIONAL INFORMATION
      O可选(Optional)
      Repeat 5

      To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable.

    • MEA
      MEASUREMENTS
      O可选(Optional)
      Repeat 5

      To specify physical measurements, including dimension tolerances, weights and counts.

    • MOA
      MONETARY AMOUNT
      O可选(Optional)
      Repeat 5

      To specify a monetary amount.

    • RFFLoop3REFERENCE LOOPM必须(Mandatory)Repeat 10
      RFFDTM
      • RFF
        REFERENCE
        M必须(Mandatory)
        Repeat 1

        To specify a reference.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 1

        To specify date, and/or time, or period.

    • NADLoop2NAME AND ADDRESS LOOPO可选(Optional)Repeat 10
      NADLOCRFFLoop4CTALoop2
      • NAD
        NAME AND ADDRESS
        M必须(Mandatory)
        Repeat 1

        To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 10

        To identify a place or a location and/or related locations.

      • RFFLoop4REFERENCE LOOPO可选(Optional)Repeat 10
        RFFDTM
        • RFF
          REFERENCE
          M必须(Mandatory)
          Repeat 1

          To specify a reference.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 1

          To specify date, and/or time, or period.

      • CTALoop2CONTACT INFORMATION LOOPO可选(Optional)Repeat 10
        CTACOM
        • CTA
          CONTACT INFORMATION
          M必须(Mandatory)
          Repeat 1

          To identify a person or a department to whom communication should be directed.

        • COM
          COMMUNICATION CONTACT
          O可选(Optional)
          Repeat 5

          To identify a communication number of a department or a person to whom communication should be directed.

    • TODLoop1TERMS OF DELIVERY OR TRANSPORT LOOPO可选(Optional)Repeat 10
      TODLOCFTX
      • TOD
        TERMS OF DELIVERY OR TRANSPORT
        M必须(Mandatory)
        Repeat 1

        To specify terms of delivery or transport.

      • LOC
        PLACE/LOCATION IDENTIFICATION
        O可选(Optional)
        Repeat 5

        To identify a place or a location and/or related locations.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 5

        To provide free form or coded text information.

    • CPSLoop1CONSIGNMENT PACKING SEQUENCE LOOPO可选(Optional)Repeat 9999
      CPSFTXPACLoop1LINLoop1
      • CPS
        CONSIGNMENT PACKING SEQUENCE
        M必须(Mandatory)
        Repeat 1

        To identify the sequence in which physical packing is presented in the consignment, and optionally to identify the hierarchical relationship between packing layers.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 5

        To provide free form or coded text information.

      • PACLoop1PACKAGE LOOPO可选(Optional)Repeat 9999
        PACMEAQTYHANLoop2PCILoop1
        • PAC
          PACKAGE
          M必须(Mandatory)
          Repeat 1

          To describe the number and type of packages/physical units.

        • MEA
          MEASUREMENTS
          O可选(Optional)
          Repeat 10

          To specify physical measurements, including dimension tolerances, weights and counts.

        • QTY
          QUANTITY
          O可选(Optional)
          Repeat 10

          To specify a pertinent quantity.

        • HANLoop2HANDLING INSTRUCTIONS LOOPO可选(Optional)Repeat 10
          HANFTX
          • HAN
            HANDLING INSTRUCTIONS
            M必须(Mandatory)
            Repeat 1

            To specify handling and where necessary, notify hazards.

          • FTX
            FREE TEXT
            O可选(Optional)
            Repeat 10

            To provide free form or coded text information.

        • PCILoop1PACKAGE IDENTIFICATION LOOPO可选(Optional)Repeat 9999
          PCIRFFCDIDTMGINLoop1
          • PCI
            PACKAGE IDENTIFICATION
            M必须(Mandatory)
            Repeat 1

            To specify markings and labels on individual packages or physical units.

          • RFF
            REFERENCE
            O可选(Optional)
            Repeat 1

            To specify a reference.

          • CDI
            PHYSICAL OR LOGICAL STATE
            O可选(Optional)
            Repeat 1

            To describe a physical or logical state.

          • DTM
            DATE/TIME/PERIOD
            O可选(Optional)
            Repeat 5

            To specify date, and/or time, or period.

          • GINLoop1GOODS IDENTITY NUMBER LOOPO可选(Optional)Repeat 99
            GINCDIDLM
            • GIN
              GOODS IDENTITY NUMBER
              M必须(Mandatory)
              Repeat 1

              To give specific identification numbers, either as single numbers or ranges.

            • CDI
              PHYSICAL OR LOGICAL STATE
              O可选(Optional)
              Repeat 1

              To describe a physical or logical state.

            • DLM
              DELIVERY LIMITATIONS
              O可选(Optional)
              Repeat 999

              To specify limitations on deliveries.

      • LINLoop1LINE ITEM LOOPO可选(Optional)Repeat 1
        LINPIAIMDMEACDIQTYALIGINGIRDTMMOAFTXRFFLoop5DGSLoop1PCILoop2
        • LIN
          LINE ITEM
          M必须(Mandatory)
          Repeat 1

          To identify a line item and configuration.

        • PIA
          ADDITIONAL PRODUCT ID
          O可选(Optional)
          Repeat 10

          To specify additional or substitutional item identification codes.

        • IMD
          ITEM DESCRIPTION
          O可选(Optional)
          Repeat 99

          To describe an item in either an industry or free format.

        • MEA
          MEASUREMENTS
          O可选(Optional)
          Repeat 10

          To specify physical measurements, including dimension tolerances, weights and counts.

        • CDI
          PHYSICAL OR LOGICAL STATE
          O可选(Optional)
          Repeat 1

          To describe a physical or logical state.

        • QTY
          QUANTITY
          O可选(Optional)
          Repeat 10

          To specify a pertinent quantity.

        • ALI
          ADDITIONAL INFORMATION
          O可选(Optional)
          Repeat 10

          To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable.

        • GIN
          GOODS IDENTITY NUMBER
          O可选(Optional)
          Repeat 999

          To give specific identification numbers, either as single numbers or ranges.

        • GIR
          RELATED IDENTIFICATION NUMBERS
          O可选(Optional)
          Repeat 999

          To specify a related set of identification numbers.

        • DTM
          DATE/TIME/PERIOD
          O可选(Optional)
          Repeat 5

          To specify date, and/or time, or period.

        • MOA
          MONETARY AMOUNT
          O可选(Optional)
          Repeat 1

          To specify a monetary amount.

        • FTX
          FREE TEXT
          O可选(Optional)
          Repeat 5

          To provide free form or coded text information.

        • RFFLoop5REFERENCE LOOPO可选(Optional)Repeat 10
          RFFDTM
          • RFF
            REFERENCE
            M必须(Mandatory)
            Repeat 1

            To specify a reference.

          • DTM
            DATE/TIME/PERIOD
            O可选(Optional)
            Repeat 1

            To specify date, and/or time, or period.

        • DGSLoop1DANGEROUS GOODS LOOPO可选(Optional)Repeat 10
          DGSQTYFTX
          • DGS
            DANGEROUS GOODS
            M必须(Mandatory)
            Repeat 1

            To identify dangerous goods.

          • QTY
            QUANTITY
            O可选(Optional)
            Repeat 1

            To specify a pertinent quantity.

          • FTX
            FREE TEXT
            O可选(Optional)
            Repeat 5

            To provide free form or coded text information.

        • PCILoop2PACKAGE IDENTIFICATION LOOPO可选(Optional)Repeat 9999
          PCICDIDTMQTYMEAGINLoop2HANLoop3
          • PCI
            PACKAGE IDENTIFICATION
            M必须(Mandatory)
            Repeat 1

            To specify markings and labels on individual packages or physical units.

          • CDI
            PHYSICAL OR LOGICAL STATE
            O可选(Optional)
            Repeat 1

            To describe a physical or logical state.

          • DTM
            DATE/TIME/PERIOD
            O可选(Optional)
            Repeat 5

            To specify date, and/or time, or period.

          • QTY
            QUANTITY
            O可选(Optional)
            Repeat 1

            To specify a pertinent quantity.

          • MEA
            MEASUREMENTS
            O可选(Optional)
            Repeat 10

            To specify physical measurements, including dimension tolerances, weights and counts.

          • GINLoop2GOODS IDENTITY NUMBER LOOPO可选(Optional)Repeat 10
            GINCDIDLM
            • GIN
              GOODS IDENTITY NUMBER
              M必须(Mandatory)
              Repeat 1

              To give specific identification numbers, either as single numbers or ranges.

            • CDI
              PHYSICAL OR LOGICAL STATE
              O可选(Optional)
              Repeat 1

              To describe a physical or logical state.

            • DLM
              DELIVERY LIMITATIONS
              O可选(Optional)
              Repeat 999

              To specify limitations on deliveries.

          • HANLoop3HANDLING INSTRUCTIONS LOOPO可选(Optional)Repeat 10
            HANFTXGIN
            • HAN
              HANDLING INSTRUCTIONS
              M必须(Mandatory)
              Repeat 1

              To specify handling and where necessary, notify hazards.

            • FTX
              FREE TEXT
              O可选(Optional)
              Repeat 5

              To provide free form or coded text information.

            • GIN
              GOODS IDENTITY NUMBER
              O可选(Optional)
              Repeat 9999

              To give specific identification numbers, either as single numbers or ranges.

  • CNT
    CONTROL TOTAL
    O可选(Optional)
    Repeat 1

    To provide control total.

  • UNT
    M必须(Mandatory)
    Repeat 1

    To end and check the completeness of a message.

Segment
EDIFACT EDI Release D01C
To head, identify and specify a message.
Elements
  • UNH010062MESSAGE REFERENCE NUMBER
    AN
    M必须(Mandatory)
    Min 0 / Max 14

    Unique message reference assigned by the sender.

  • UNH02S009MESSAGE IDENTIFIERM必须(Mandatory)
    0065005200540051005701100113
    • UNH02010065Message type
      ID
      M必须(Mandatory)
      Min 0 / Max 6

      Code identifying a type of message and assigned by its controlling agency.

      Codes (212)
    • UNH02020052Message version number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Version number of a message type.

      Codes (8)
    • UNH02030054Message release number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Release number within the current message version number.

      Codes (55)
    • UNH02040051Controlling agency, coded
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
    • UNH02050057Association assigned code
      AN
      O可选(Optional)
      Min 0 / Max 6

      Code, assigned by the association responsible for the design and maintenance of the message type concerned, which further identifies the message.

    • UNH02060110Code list directory version number
      AN
      O可选(Optional)
      Min 0 / Max 6

      Version number of the code list directory.

    • UNH02070113Message type sub-function identification
      ID
      O可选(Optional)
      Min 0 / Max 6

      Code identifying a sub-function of a message type.

      Codes (21)
  • UNH030068COMMON ACCESS REFERENCE
    AN
    O可选(Optional)
    Min 0 / Max 35

    Reference serving as a key to relate all subsequent transfers of data to the same business case or file.

  • UNH04S010STATUS OF THE TRANSFERO可选(Optional)
    00700073
    • UNH04010070Sequence of transfers
      N
      M必须(Mandatory)
      Min 0 / Max 2

      Number assigned by the sender indicating the transfer sequence of a message related to the same topic. The message could be an addition or a change to an earlier transfer related to the same topic.

    • UNH04020073First and last transfer
      ID
      O可选(Optional)
      Min 1 / Max 1

      Indication used for the first and last message in a sequence of messages related to the same topic.

      Codes (2)
  • UNH05S016MESSAGE SUBSET IDENTIFICATIONO可选(Optional)
    0115011601180051
    • UNH05010115Message subset identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of a message subset, assigned by its controlling agency.

    • UNH05020116Message subset version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message subset.

    • UNH05030118Message subset release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message subset version number.

    • UNH05040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH06S017MESSAGE IMPLEMENTATION GUIDELINE IDENTIFICATIONO可选(Optional)
    0121012201240051
    • UNH06010121Message implementation guideline identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of the message implementation guideline, assigned by its controlling agency.

    • UNH06020122Message implementation guideline version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message implementation guideline.

    • UNH06030124Message implementation guideline release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message implementation guideline version number.

    • UNH06040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH07S018SCENARIO IDENTIFICATIONO可选(Optional)
    0127012801300051
    • UNH07010127Scenario identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Code identifying scenario.

    • UNH07020128Scenario version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of a scenario.

    • UNH07030130Scenario release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the scenario version number.

    • UNH07040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)