IFTIAGDangerous cargo list

The International Forwarding and Transport Dangerous Cargo List Message is a message:

- from the party acting on behalf of the carrier for the gathering of the dangerous goods information of the cargo in a certain port or place of call or loading, - to the party acting on behalf of the carrier in the next port or place of call or discharge,

conveying the information relating to one conveyance or voyage of a means of transport such as a vessel, train, truck or barge, on the dangerous goods being carried on board - irrespective of the operations that will take place in the next port of call. This message provides the basic information by which the message recipient can notify to the local authorities about the loading, unloading and transit-related operations, by means of the International forwarding and transport dangerous goods notification message (IFTDGN).

  • UNH
    M必须(Mandatory)
    Repeat 1

    To head, identify and specify a message.

  • BGM
    BEGINNING OF MESSAGE
    M必须(Mandatory)
    Repeat 1

    To indicate the type and function of a message and to transmit the identifying number.

  • DTM
    DATE/TIME/PERIOD
    O可选(Optional)
    Repeat 9

    To specify date, and/or time, or period.

  • CNT
    CONTROL TOTAL
    M必须(Mandatory)
    Repeat 1

    To provide control total.

  • FTX
    FREE TEXT
    O可选(Optional)
    Repeat 5

    To provide free form or coded text information.

  • RFFLoop1REFERENCE LOOPO可选(Optional)Repeat 9
    RFFDTM
    • RFF
      REFERENCE
      M必须(Mandatory)
      Repeat 1

      To specify a reference.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

  • TDTLoop1DETAILS OF TRANSPORT LOOPM必须(Mandatory)Repeat 1
    TDTDTMCTA
    • TDT
      DETAILS OF TRANSPORT
      M必须(Mandatory)
      Repeat 1

      To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 1

      To specify date, and/or time, or period.

    • CTA
      CONTACT INFORMATION
      O可选(Optional)
      Repeat 1

      To identify a person or a department to whom communication should be directed.

  • NADLoop1NAME AND ADDRESS LOOPO可选(Optional)Repeat 9
    NADCTALoop1
    • NAD
      NAME AND ADDRESS
      M必须(Mandatory)
      Repeat 1

      To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    • CTALoop1CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
      CTACOM
      • CTA
        CONTACT INFORMATION
        M必须(Mandatory)
        Repeat 1

        To identify a person or a department to whom communication should be directed.

      • COM
        COMMUNICATION CONTACT
        O可选(Optional)
        Repeat 9

        To identify a communication number of a department or a person to whom communication should be directed.

  • LOCLoop1PLACE/LOCATION IDENTIFICATION LOOPM必须(Mandatory)Repeat 3
    LOCNADRFFDTM
    • LOC
      PLACE/LOCATION IDENTIFICATION
      M必须(Mandatory)
      Repeat 1

      To identify a place or a location and/or related locations.

    • NAD
      NAME AND ADDRESS
      O可选(Optional)
      Repeat 1

      To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 1

      To specify a reference.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 1

      To specify date, and/or time, or period.

  • EQDLoop1EQUIPMENT DETAILS LOOPO可选(Optional)Repeat 9999
    EQDRFFSEL
    • EQD
      EQUIPMENT DETAILS
      M必须(Mandatory)
      Repeat 1

      To identify a unit of equipment.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 9

      To specify a reference.

    • SEL
      SEAL NUMBER
      O可选(Optional)
      Repeat 1

      To specify the seal number or a range of seal numbers.

  • CNILoop1CONSIGNMENT INFORMATION LOOPM必须(Mandatory)Repeat 9999
    CNILOCRFFNADGIDLoop1
    • CNI
      CONSIGNMENT INFORMATION
      M必须(Mandatory)
      Repeat 1

      To identify one consignment.

    • LOC
      PLACE/LOCATION IDENTIFICATION
      O可选(Optional)
      Repeat 2

      To identify a place or a location and/or related locations.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 2

      To specify a reference.

    • NAD
      NAME AND ADDRESS
      O可选(Optional)
      Repeat 2

      To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    • GIDLoop1GOODS ITEM DETAILS LOOPM必须(Mandatory)Repeat 9999
      GIDFTXPCIDGSLoop1
      • GID
        GOODS ITEM DETAILS
        M必须(Mandatory)
        Repeat 1

        To indicate totals of a goods item.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 5

        To provide free form or coded text information.

      • PCI
        PACKAGE IDENTIFICATION
        O可选(Optional)
        Repeat 1

        To specify markings and labels on individual packages or physical units.

      • DGSLoop1DANGEROUS GOODS LOOPM必须(Mandatory)Repeat 1
        DGSFTXLOCMEASGPLoop1
        • DGS
          DANGEROUS GOODS
          M必须(Mandatory)
          Repeat 1

          To identify dangerous goods.

        • FTX
          FREE TEXT
          M必须(Mandatory)
          Repeat 9

          To provide free form or coded text information.

        • LOC
          PLACE/LOCATION IDENTIFICATION
          O可选(Optional)
          Repeat 99

          To identify a place or a location and/or related locations.

        • MEA
          MEASUREMENTS
          M必须(Mandatory)
          Repeat 9

          To specify physical measurements, including dimension tolerances, weights and counts.

        • SGPLoop1SPLIT GOODS PLACEMENT LOOPO可选(Optional)Repeat 9999
          SGPLOCMEA
          • SGP
            SPLIT GOODS PLACEMENT
            M必须(Mandatory)
            Repeat 1

            To specify the placement of goods in relation to equipment.

          • LOC
            PLACE/LOCATION IDENTIFICATION
            O可选(Optional)
            Repeat 1

            To identify a place or a location and/or related locations.

          • MEA
            MEASUREMENTS
            O可选(Optional)
            Repeat 2

            To specify physical measurements, including dimension tolerances, weights and counts.

  • UNT
    M必须(Mandatory)
    Repeat 1

    To end and check the completeness of a message.

Segment
EDIFACT EDI Release D01B
To head, identify and specify a message.
Elements
  • UNH010062MESSAGE REFERENCE NUMBER
    AN
    M必须(Mandatory)
    Min 0 / Max 14

    Unique message reference assigned by the sender.

  • UNH02S009MESSAGE IDENTIFIERM必须(Mandatory)
    0065005200540051005701100113
    • UNH02010065Message type
      ID
      M必须(Mandatory)
      Min 0 / Max 6

      Code identifying a type of message and assigned by its controlling agency.

      Codes (211)
    • UNH02020052Message version number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Version number of a message type.

      Codes (8)
    • UNH02030054Message release number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Release number within the current message version number.

      Codes (55)
    • UNH02040051Controlling agency, coded
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
    • UNH02050057Association assigned code
      AN
      O可选(Optional)
      Min 0 / Max 6

      Code, assigned by the association responsible for the design and maintenance of the message type concerned, which further identifies the message.

    • UNH02060110Code list directory version number
      AN
      O可选(Optional)
      Min 0 / Max 6

      Version number of the code list directory.

    • UNH02070113Message type sub-function identification
      ID
      O可选(Optional)
      Min 0 / Max 6

      Code identifying a sub-function of a message type.

      Codes (21)
  • UNH030068COMMON ACCESS REFERENCE
    AN
    O可选(Optional)
    Min 0 / Max 35

    Reference serving as a key to relate all subsequent transfers of data to the same business case or file.

  • UNH04S010STATUS OF THE TRANSFERO可选(Optional)
    00700073
    • UNH04010070Sequence of transfers
      N
      M必须(Mandatory)
      Min 0 / Max 2

      Number assigned by the sender indicating the transfer sequence of a message related to the same topic. The message could be an addition or a change to an earlier transfer related to the same topic.

    • UNH04020073First and last transfer
      ID
      O可选(Optional)
      Min 1 / Max 1

      Indication used for the first and last message in a sequence of messages related to the same topic.

      Codes (2)
  • UNH05S016MESSAGE SUBSET IDENTIFICATIONO可选(Optional)
    0115011601180051
    • UNH05010115Message subset identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of a message subset, assigned by its controlling agency.

    • UNH05020116Message subset version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message subset.

    • UNH05030118Message subset release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message subset version number.

    • UNH05040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH06S017MESSAGE IMPLEMENTATION GUIDELINE IDENTIFICATIONO可选(Optional)
    0121012201240051
    • UNH06010121Message implementation guideline identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of the message implementation guideline, assigned by its controlling agency.

    • UNH06020122Message implementation guideline version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message implementation guideline.

    • UNH06030124Message implementation guideline release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message implementation guideline version number.

    • UNH06040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH07S018SCENARIO IDENTIFICATIONO可选(Optional)
    0127012801300051
    • UNH07010127Scenario identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Code identifying scenario.

    • UNH07020128Scenario version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of a scenario.

    • UNH07030130Scenario release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the scenario version number.

    • UNH07040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)