COSTCOContainer stuffing/stripping confirmation

Confirmation that specified goods/consignments have been stuffed into or stripped from LCL-containers. This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.

  • UNH
    M必须(Mandatory)
    Repeat 1

    To head, identify and specify a message.

  • BGM
    BEGINNING OF MESSAGE
    M必须(Mandatory)
    Repeat 1

    To indicate the type and function of a message and to transmit the identifying number.

  • DTM
    DATE/TIME/PERIOD
    O可选(Optional)
    Repeat 9

    To specify date, and/or time, or period.

  • FTX
    FREE TEXT
    O可选(Optional)
    Repeat 9

    To provide free form or coded text information.

  • RFFLoop1REFERENCE LOOPO可选(Optional)Repeat 9
    RFFDTM
    • RFF
      REFERENCE
      M必须(Mandatory)
      Repeat 1

      To specify a reference.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

  • TDTLoop1TRANSPORT INFORMATION LOOPM必须(Mandatory)Repeat 1
    TDTDTMRFFLOCLoop1
    • TDT
      TRANSPORT INFORMATION
      M必须(Mandatory)
      Repeat 1

      To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 9

      To specify a reference.

    • LOCLoop1PLACE/LOCATION IDENTIFICATION LOOPO可选(Optional)Repeat 9
      LOCDTM
      • LOC
        PLACE/LOCATION IDENTIFICATION
        M必须(Mandatory)
        Repeat 1

        To identify a place or a location and/or related locations.

      • DTM
        DATE/TIME/PERIOD
        O可选(Optional)
        Repeat 9

        To specify date, and/or time, or period.

  • NADLoop1NAME AND ADDRESS LOOPM必须(Mandatory)Repeat 9
    NADCTALoop1
    • NAD
      NAME AND ADDRESS
      M必须(Mandatory)
      Repeat 1

      To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    • CTALoop1CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
      CTACOM
      • CTA
        CONTACT INFORMATION
        M必须(Mandatory)
        Repeat 1

        To identify a person or a department to whom communication should be directed.

      • COM
        COMMUNICATION CONTACT
        O可选(Optional)
        Repeat 9

        To identify a communication number of a department or a person to whom communication should be directed.

  • EQDLoop1EQUIPMENT DETAILS LOOPM必须(Mandatory)Repeat 999
    EQDRFFDTMTSRDIMSELEQAHANNADDGSLoop1TMPLoop1
    • EQD
      EQUIPMENT DETAILS
      M必须(Mandatory)
      Repeat 1

      To identify a unit of equipment.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 9

      To specify a reference.

    • DTM
      DATE/TIME/PERIOD
      O可选(Optional)
      Repeat 9

      To specify date, and/or time, or period.

    • TSR
      TRANSPORT SERVICE REQUIREMENTS
      O可选(Optional)
      Repeat 9

      To specify the contract and carriage conditions and service and priority requirements for the transport.

    • DIM
      DIMENSIONS
      O可选(Optional)
      Repeat 9

      To specify dimensions.

    • SEL
      SEAL NUMBER
      O可选(Optional)
      Repeat 9

      To specify the seal number or a range of seal numbers.

    • EQA
      ATTACHED EQUIPMENT
      O可选(Optional)
      Repeat 9

      To specify attached or related equipment.

    • HAN
      HANDLING INSTRUCTIONS
      O可选(Optional)
      Repeat 9

      To specify handling and where necessary, notify hazards.

    • NAD
      NAME AND ADDRESS
      O可选(Optional)
      Repeat 9

      To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    • DGSLoop1DANGEROUS GOODS LOOPO可选(Optional)Repeat 99
      DGSFTXMEACTALoop2
      • DGS
        DANGEROUS GOODS
        M必须(Mandatory)
        Repeat 1

        To identify dangerous goods.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

      • MEA
        MEASUREMENTS
        O可选(Optional)
        Repeat 9

        To specify physical measurements, including dimension tolerances, weights and counts.

      • CTALoop2CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
        CTACOM
        • CTA
          CONTACT INFORMATION
          M必须(Mandatory)
          Repeat 1

          To identify a person or a department to whom communication should be directed.

        • COM
          COMMUNICATION CONTACT
          O可选(Optional)
          Repeat 9

          To identify a communication number of a department or a person to whom communication should be directed.

    • TMPLoop1TEMPERATURE LOOPO可选(Optional)Repeat 9
      TMPRNG
      • TMP
        TEMPERATURE
        M必须(Mandatory)
        Repeat 1

        To specify the temperature setting.

      • RNG
        RANGE DETAILS
        O可选(Optional)
        Repeat 1

        To identify a range.

  • CNILoop1CONSIGNMENT INFORMATION LOOPM必须(Mandatory)Repeat 999
    CNIRFFGIDLoop1
    • CNI
      CONSIGNMENT INFORMATION
      M必须(Mandatory)
      Repeat 1

      To identify one consignment.

    • RFF
      REFERENCE
      O可选(Optional)
      Repeat 9

      To specify a reference.

    • GIDLoop1GOODS ITEM DETAILS LOOPO可选(Optional)Repeat 999
      GIDHANTMPLoop2FTXMEAPCIDOCSGPLoop1DGSLoop2
      • GID
        GOODS ITEM DETAILS
        M必须(Mandatory)
        Repeat 1

        To indicate totals of a goods item.

      • HAN
        HANDLING INSTRUCTIONS
        O可选(Optional)
        Repeat 9

        To specify handling and where necessary, notify hazards.

      • TMPLoop2TEMPERATURE LOOPO可选(Optional)Repeat 9
        TMPRNG
        • TMP
          TEMPERATURE
          M必须(Mandatory)
          Repeat 1

          To specify the temperature setting.

        • RNG
          RANGE DETAILS
          O可选(Optional)
          Repeat 1

          To identify a range.

      • FTX
        FREE TEXT
        O可选(Optional)
        Repeat 9

        To provide free form or coded text information.

      • MEA
        MEASUREMENTS
        O可选(Optional)
        Repeat 9

        To specify physical measurements, including dimension tolerances, weights and counts.

      • PCI
        PACKAGE IDENTIFICATION
        O可选(Optional)
        Repeat 9

        To specify markings and labels on individual packages or physical units.

      • DOC
        DOCUMENT/MESSAGE DETAILS
        O可选(Optional)
        Repeat 9

        To identify documents and details directly related to it.

      • SGPLoop1SPLIT GOODS PLACEMENT LOOPM必须(Mandatory)Repeat 999
        SGPMEA
        • SGP
          SPLIT GOODS PLACEMENT
          M必须(Mandatory)
          Repeat 1

          To specify the placement of goods in relation to equipment.

        • MEA
          MEASUREMENTS
          O可选(Optional)
          Repeat 9

          To specify physical measurements, including dimension tolerances, weights and counts.

      • DGSLoop2DANGEROUS GOODS LOOPO可选(Optional)Repeat 99
        DGSFTXMEACTALoop3SGPLoop2
        • DGS
          DANGEROUS GOODS
          M必须(Mandatory)
          Repeat 1

          To identify dangerous goods.

        • FTX
          FREE TEXT
          O可选(Optional)
          Repeat 9

          To provide free form or coded text information.

        • MEA
          MEASUREMENTS
          O可选(Optional)
          Repeat 9

          To specify physical measurements, including dimension tolerances, weights and counts.

        • CTALoop3CONTACT INFORMATION LOOPO可选(Optional)Repeat 9
          CTACOM
          • CTA
            CONTACT INFORMATION
            M必须(Mandatory)
            Repeat 1

            To identify a person or a department to whom communication should be directed.

          • COM
            COMMUNICATION CONTACT
            O可选(Optional)
            Repeat 9

            To identify a communication number of a department or a person to whom communication should be directed.

        • SGPLoop2SPLIT GOODS PLACEMENT LOOPO可选(Optional)Repeat 999
          SGPMEA
          • SGP
            SPLIT GOODS PLACEMENT
            M必须(Mandatory)
            Repeat 1

            To specify the placement of goods in relation to equipment.

          • MEA
            MEASUREMENTS
            O可选(Optional)
            Repeat 9

            To specify physical measurements, including dimension tolerances, weights and counts.

  • CNT
    CONTROL TOTAL
    O可选(Optional)
    Repeat 1

    To provide control total.

  • UNT
    M必须(Mandatory)
    Repeat 1

    To end and check the completeness of a message.

Segment
EDIFACT EDI Release D11B
To head, identify and specify a message.
Elements
  • UNH010062MESSAGE REFERENCE NUMBER
    AN
    M必须(Mandatory)
    Min 0 / Max 14

    Unique message reference assigned by the sender.

  • UNH02S009MESSAGE IDENTIFIERM必须(Mandatory)
    0065005200540051005701100113
    • UNH02010065Message type
      ID
      M必须(Mandatory)
      Min 0 / Max 6

      Code identifying a type of message and assigned by its controlling agency.

      Codes (211)
    • UNH02020052Message version number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Version number of a message type.

      Codes (8)
    • UNH02030054Message release number
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Release number within the current message version number.

      Codes (55)
    • UNH02040051Controlling agency, coded
      ID
      M必须(Mandatory)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
    • UNH02050057Association assigned code
      AN
      O可选(Optional)
      Min 0 / Max 6

      Code, assigned by the association responsible for the design and maintenance of the message type concerned, which further identifies the message.

    • UNH02060110Code list directory version number
      AN
      O可选(Optional)
      Min 0 / Max 6

      Version number of the code list directory.

    • UNH02070113Message type sub-function identification
      ID
      O可选(Optional)
      Min 0 / Max 6

      Code identifying a sub-function of a message type.

      Codes (21)
  • UNH030068COMMON ACCESS REFERENCE
    AN
    O可选(Optional)
    Min 0 / Max 35

    Reference serving as a key to relate all subsequent transfers of data to the same business case or file.

  • UNH04S010STATUS OF THE TRANSFERO可选(Optional)
    00700073
    • UNH04010070Sequence of transfers
      N
      M必须(Mandatory)
      Min 0 / Max 2

      Number assigned by the sender indicating the transfer sequence of a message related to the same topic. The message could be an addition or a change to an earlier transfer related to the same topic.

    • UNH04020073First and last transfer
      ID
      O可选(Optional)
      Min 1 / Max 1

      Indication used for the first and last message in a sequence of messages related to the same topic.

      Codes (2)
  • UNH05S016MESSAGE SUBSET IDENTIFICATIONO可选(Optional)
    0115011601180051
    • UNH05010115Message subset identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of a message subset, assigned by its controlling agency.

    • UNH05020116Message subset version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message subset.

    • UNH05030118Message subset release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message subset version number.

    • UNH05040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH06S017MESSAGE IMPLEMENTATION GUIDELINE IDENTIFICATIONO可选(Optional)
    0121012201240051
    • UNH06010121Message implementation guideline identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Coded identification of the message implementation guideline, assigned by its controlling agency.

    • UNH06020122Message implementation guideline version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of the message implementation guideline.

    • UNH06030124Message implementation guideline release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the message implementation guideline version number.

    • UNH06040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)
  • UNH07S018SCENARIO IDENTIFICATIONO可选(Optional)
    0127012801300051
    • UNH07010127Scenario identification
      AN
      M必须(Mandatory)
      Min 0 / Max 14

      Code identifying scenario.

    • UNH07020128Scenario version number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Version number of a scenario.

    • UNH07030130Scenario release number
      AN
      O可选(Optional)
      Min 0 / Max 3

      Release number within the scenario version number.

    • UNH07040051Controlling agency, coded
      ID
      O可选(Optional)
      Min 0 / Max 3

      Code identifying a controlling agency.

      Codes (26)